ISO 13910-2014 PDF

ISO 13910-2014 PDF

Timber structures - Strength graded timber - Test methods for structural properties

$71.50 $143.00 -50%
Product Code: ISO 13910
Stock In Stock
Edition: 2ND
Published: 05/01/2014
Number of Pages: 24
File Size: 1 file, 972 Bytes

Available Options

Product Description

Timber structures - Strength graded timber - Test methods for structural properties

Introduction: This International Standard provides requirements for testing of structural properties for a specific grade and size of sawn timber. In accordance with the requirements of performance-based International Standards, it is concerned with the measurement of properties similar to those that occur under service conditions and are intended for deriving engineering properties in structural design codes. Hence, terms such as “bending strength”, “shear strength”, “bearing strength”, etc. relate to the loading configuration used and to the targeted mode of failure. It is not the intent to imply that every property of every grade and size of timber used in building construction needs to be assessed according to this International Standard. The requirements for any assessment typically are specified in building regulations, quality manuals or other material standards and specifications. This document is an internationally-agreed reference standard for measurement of structural properties of strength-graded timber. Other standards related to the measurement of structural properties may be deemed to comply with this International Standard, provided that the adjustments necessary to establish equivalency between this and other standards are applied appropriately © ISO 2014 – All rights reserved

Scope: This International Standard specifies test procedures for full-size sawn timber that has been strength- graded, for the derivation of design properties in codes dealing with structural engineering design. It is applicable to sawn timber of rectangular cross-section subjected to a short-duration load. 2 Terms and definitions For the purposes of this document, the following terms and definitions apply. 2.1 grade population of timber with defined design properties in a design standard 2.2 piece of timber timber of rectangular cross-section manufactured for construction purposes of a specific grade 2.3 test specimen length of timber, cut from a piece, for purposes of testing to evaluate a timber property INTERNATIONAL STANDARD ISO 13910:2014(E) © ISO 2014 – All rights reserved

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 13910-2014 PDF

ISO 13910-2014 PDF

$71.50 $143.00