Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for optical properties of ceramic phosphors for white lightemitting diodes with reference materials
Introduction: White light-emitting diode (LED)-based solid-state lighting (SSL) has been widely used for a variety of applications as an alternative for incandescent and fluorescent lamps. Initially, white LEDs (comprising blue LEDs and yellow phosphors) became popular as backlight sources for small-size liquid-crystal displays (LCDs) used in mobile phones and digital cameras. These were followed by white LEDs (consisting of blue LEDs combined with green and red phosphors) applied to backlight sources for large- area LCDs. Subsequently, LED lamps were commercialised for general lighting, replacing conventional luminaires and capitalising on their advantages, such as compactness, high luminous efficiency, high brightness below 0 °C or higher ambient temperatures, long life and controllability of light intensity and colour temperature. The optical performance of a phosphor material for use in a white LED is one of the most important factors influencing the performance of the white LED. Accordingly, it is of great importance not only for researchers and manufacturers of phosphors for use in white LEDs but also for researchers and manufacturers of white LED devices to evaluate optical properties of the phosphors in a well-established manner. Photoluminescence quantum efficiency is one of the key optical parameters of phosphors for use in white LEDs and has been measured extensively by using an integrating sphere-based absolute method. ISO 20351 was developed in accordance with the demand for s
Scope: This document specifies a substitution measurement method to measure internal quantum efficiency, external quantum efficiency and absorptance of ceramic phosphor powders, which are used in white light-emitting diodes (LEDs) and emit visible light when excited by UV or blue light. In this method, commercially available measurement equipment, such as a fluorescence spectrophotometer or a spectroradiometer equipped with a monochromatic light source as incident light, are used to measure fluorescence spectra for reference materials whose quantum efficiencies and absorptance have been determined using the methods in ISO 23946 and a phosphor material under test.