Safety of machinery — Risk assessment — Part 1: Principles
Introduction: The structure of safety standards in the field of machinery is as follows. a) Type-A standards (basic standards) give basic concepts, principles for design, and general aspects that can be applied to machinery. b) Type-B standards (generic safety standards) deal with one or more safety aspect(s) or one or more type(s) of safeguards that can be used across a wide range of machinery: ⎯ type-B1 standards on particular safety aspects (e.g. safety distances, surface temperature, noise); ⎯ type-B2 standards on safeguards (e.g. two-hands controls, interlocking devices, pressure sensitive devices, guards). c) Type-C standards (machine safety standards) deal with detailed safety requirements for a particular machine or group of machines. This part of ISO 14121 is a type-A standard as stated in ISO 12100-1. When provisions of a type-C standard are different from those which are stated in type-A or type-B standards, the provisions of the type-C standard take precedence over the provisions of the other standards for machines that have been designed and built according to the provisions of the type-C standard. The purpose of this type-A standard is to describe principles for a consistent systematic procedure for risk assessment as stated in ISO 12100-1:2003, Clause 5. This part of ISO 14121 gives guidance for decisions related to the design of machinery and will assist in the preparation of consistent and appropriate type-B and type-C standards, so that machines can be produced that are s
Scope: This part of ISO 14121 establishes general principles intended to be used to meet the risk reduction objectives established in ISO 12100-1:2003, Clause 5. These principles of risk assessment bring together knowledge and experience of the design, use, incidents, accidents and harm related to machinery in order to assess the risks posed during the relevant phases of the life cycle of a machine. This part of ISO 14121 provides guidance on the information that will be required to enable risk assessment to be carried out. Procedures are described for identifying hazards and estimating and evaluating risk. It also gives guidance on the making of decisions relating to the safety of machinery and on the type of documentation required to verify the risk assessment carried out. It is not applicable to risks posed to domestic animals, property or the environment.
Contents:
- Foreword
- Introduction
- Scope