ISO 14127-2024 PDF

ISO 14127-2024 PDF

Carbon-fibre-reinforced composites-Determination of the resin, fibre and void contents

$60.00 $120.00 -50%
Product Code: ISO 14127
Stock In Stock
Edition: 2.
Published: 07/2024
Number of Pages: 24
File Size: 1 file, 1 Byte

Available Options

Product Description

Composites renforcés de fibres de carbone — Détermination des teneurs en résine, en fibre et en vide

Introduction: The constituent contents such as fibre content, resin content as well as void content are parameters characterize physical/structural properties of carbon-fibre-reinforced composites. Such properties are proven to have influence on mechanical performances of carbon-fibre-reinforced composites; thus, the constituent contents are always required as important index for processing quality control. Microscopic method calculates the fibre volume content/areal void content from measured fibre area/void area and the area of cross-section of a specimen. The principle of this method differs from method A or B, so that method C might be available when some of the types of resin were so hard to remove or in the case of lacking information of the prepregs. Meanwhile, thanks to the development of electronic and information technology, equipment integrated with image analysis functions is commercially available. The microscopic method has multiple advantages of being efficient, safe, commercial and environment friendly. © ISO 2024 – All rights reserved

Scope: This document specifies methods for calculating the resin, fibre and void contents of a carbon-fibre- reinforced composite from the densities of the resin, the fibre and the composite and the mass of fibre in the composite (using method A), for calculating the fibre content from the thickness of the composite (using method B), and for calculating the fibre content by volume and areal void content through microscopic analysis (using method C). Method A specifies three different resin removal procedures for the determination of the mass of fibre in the composite (viz a combustion procedure, a procedure by digestion in nitric acid and a procedure by digestion in a mixture of sulfuric acid and hydrogen peroxide). The selection of the procedure to be used is made by considering the combustibility of the resin used in the composite, its ability to decompose and the type of resin concerned. Method A is only of limited applicability when filled resins are present that can prevent complete dissolution and/or combustibility of the resin. Method B (thickness measurement method) is only applicable to composites moulded from prepregs of known fibre mass per unit area. Method C (microscopic method) is only applicable to carbon-fibre-reinforced composites with unidirectional, orthogonal and multidirectional laminates. It can also be used as reference for determination of the areal void content and fibre volume content of aramid- or glass-fibre-reinforced plastics, but is not applicable to fabric reinforced composites.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 14127-2024 PDF

ISO 14127-2024 PDF

$60.00 $120.00