ISO 14230-2-2016 PDF

ISO 14230-2-2016 PDF

Road vehicles - Diagnostic communication over K-Line (DoKLine) - Part 2: Data link layer

$129.00 $258.00 -50%
Product Code: ISO 14230-2
Stock In Stock
Edition: 3RD
Published: 08/15/2016
Number of Pages: 60
File Size: 1 file, 4 Bytes

Available Options

Product Description

Road vehicles - Diagnostic communication over K-Line (DoKLine) - Part 2: Data link layer

Introduction: This document has been established in order to define common requirements for vehicle diagnostic systems implemented on K-Line (UART based) communication link, as specified in ISO 14230-1. To achieve this, it is based on the Open Systems Interconnection (OSI) Basic Reference Model in accordance with ISO/IEC 7498-1 and ISO/IEC 10731, which structures communication systems into seven layers. When mapped on this model, the services specified by ISO 14230 are broken into the following: — Diagnostic services (layer 7), specified in ISO 14229-1, ISO 14229-6; — Presentation layer (layer 6): — vehicle manufacturer specific; — legislated WWH-OBD: ISO 27145-2, SAE 1930-DA, SAE J1979-DA, SAE J2012-DA, SAE J1939:2011, Appendix C (SPN), SAE J1939-73:2010, Appendix A (FMI); — Session layer services (layer 5): — legislated OBD: specified in ISO 14229-2; — legislated WWH-OBD: specified in ISO 14229-2; — Transport layer services (layer 4), specified in ISO 14230-2; — Network layer services (layer 3), specified in ISO 14230-2; — Data link layer (layer 2), specified in ISO 14230-4, ISO 14230-2; — Physical layer (layer 1), specified in ISO 14230-1; in accordance with Table 1. Table 1 — Enhanced and legislated OBD diagnostic specifications applicable to the OSI layers OSI seven layera Enhanced diagnostics Legislated OBD (On-Board Diagnostics) Legislated WWH-OBD (On-Board Diagnostics) Application (layer 7) ISO 14229-1, ISO 14229-6 ISO 15031-5 ISO 14229-1, ISO 27145-3 Presentation (layer 6) vehicle

Scope: This document specifies data link layer services tailored to meet the requirements of UART-based vehicle communication systems on K-Line as specified in ISO 14230-1. It has been defined in accordance with the diagnostic services established in ISO 14229-1 and ISO 15031-5, but is not limited to use with them and is also compatible with most other communication needs for in-vehicle networks. The protocol specifies an unconfirmed communication. The diagnostic communication over K-Line (DoK-Line) protocol supports the standardized service primitive interface as specified in ISO 14229-2. This document provides the data link layer services to support different application layer implementations like the following: — enhanced vehicle diagnostics (emissions-related system diagnostics beyond legislated functionality, non-emissions-related system diagnostics); — emissions-related OBD as specified in ISO 15031, SAE J1979-DA and SAE J2012-DA; — in addition, this document clarifies the differences in initialization for K-line protocols defined in ISO 9141 and ISO 14230. This is important since a server supports only one of the protocols mentioned above and the client has to handle the coexistence of all protocols during the protocol determination procedure.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 14230-2-2016 PDF

ISO 14230-2-2016 PDF

$129.00 $258.00