ISO 14253-5-2015 PDF

ISO 14253-5-2015 PDF

Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments

$71.50 $143.00 -50%
Product Code: ISO 14253-5
Stock In Stock
Edition: 1ST
Published: 09/01/2015
Number of Pages: 24
File Size: 1 file, 415 Bytes

Available Options

Product Description

Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments

Introduction: This part of ISO 14253 belongs to the general geometrical product specification (GPS) series of documents (see ISO 14638). It influences chain link F of all chains of standards in the general GPS matrix. The ISO/GPS matrix model given in ISO 14638 gives an overview of the ISO/GPS system of which this international standard is a part. The fundamental rules of ISO/GPS given in ISO 8015 apply to this part of ISO 14253 and the default decision rules given in ISO 14253-1 apply to specifications made in accordance with this part of ISO 14253, unless otherwise indicated. For more detailed information about the relationship of this part of ISO 14253 to other standards and to the GPS matrix model, see Annex B. Decision rules for deciding conformity or non-conformity to specifications are based on the measurement uncertainty incurred while testing. Usual practice in measurement familiarizes metrologists and practitioners with measurement uncertainty. Any possible effect that may affect the measurement result is considered and quantified as an uncertainty component and is eventually included in the combined uncertainty. The purpose of the measurement is to gather quantitative information on a given measurand, and the uncertainty statement expresses how reliable that information is. In the case of tests of indicating measuring instruments, the purpose of the measurement is to investigate one or more metrological characteristics of the indicating measuring instrument rather than to measur

Scope: This part of ISO 14253 specifies concepts and terms for evaluating the uncertainties of the test values derived according to a test protocol agreed upon by the parties and relative to instrument indication(s), obtained in verification testing of GPS indicating measuring instruments. NOTE The uncertainty of the test values, referred to as test value uncertainty, is not to be confused with the measurement uncertainty associated with using that indicating measuring instrument to measure workpieces. The former only is covered in this part of ISO 14253; for guidance on the latter see the ISO/IEC Guide 98-3 (GUM) and ISO 14253-2. When a test of an indicating measuring instrument comprises several test values, some relative to the instrument indication and some to other metrological characteristics, this part of ISO 14253 is concerned with the uncertainty of the former only. This part of ISO 14253 does not provide guidelines to ensure the adequacy of a test protocol; rather, once a test protocol is given, it describes how to evaluate the consequent test value uncertainty.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 14253-5-2015 PDF

ISO 14253-5-2015 PDF

$71.50 $143.00