ISO 1431-1-2024 PDF

ISO 1431-1-2024 PDF

Rubber, vulcanized or thermoplastic-Resistance to ozone cracking-Part 1: Static and dynamic strain testing

$60.00 $120.00 -50%
Product Code: ISO 1431-1
Stock In Stock
Edition: 7.
Published: 07/2024
Number of Pages: 30
File Size: 1 file, 2 Bytes

Available Options

Product Description

Caoutchouc vulcanisé ou thermoplastique - Résistance au craquelage par l’ozone - Partie 1: Essais sous allongement statique et dynamique

Introduction: Ozone is generally present in small amounts in the atmosphere. However, even very small amounts of ozone can cause cracking in susceptible rubbers under tensile strain, resulting in loss of strength. Hence, it is necessary to test the resistance of rubbers to exposure to ozone. Because of the uncertainties of natural exposure, testing for ozone resistance of rubbers is normally done in the laboratory using specially designed ozone cabinets. Great caution is necessary in attempting to relate standard test results to service performance, since the relative ozone resistance of different rubbers can vary markedly depending on the conditions, especially ozone concentration, temperature and relative humidity.[5] In addition, tests are carried out on thin test pieces deformed in tension and the significance of attack for articles in service can be quite different owing to the effects of size and of the type and magnitude of the deformation. Explanatory notes on the nature of ozone cracking are given in Annex A. © ISO 2024 – All rights reserved

Scope: This document specifies the procedures intended for use in estimating the resistance of vulcanized or thermoplastic rubbers to cracking when exposed, under static or dynamic tensile strain, to air containing a definite concentration of ozone, at a definite temperature and, if required, at a definite relative humidity in circumstances that exclude the effects of direct light. Either visual observation or image analysis, or both, are used to evaluate the formation and growth of cracks. The changes in physical or chemical properties resulting from exposure can also be determined. Reference and alternative methods for determining the ozone concentration are described in ISO 1431-3.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 1431-1-2024 PDF

ISO 1431-1-2024 PDF

$60.00 $120.00