ISO 14322-2018 PDF

ISO 14322-2018 PDF

Plastics - Epoxy resins - Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry (DSC)

$48.00 $96.00 -50%
Product Code: ISO 14322
Stock In Stock
Edition: 2ND
Published: 07/2018
Number of Pages: 16
File Size: 1 file, 1 Byte

Available Options

Product Description

Plastics - Epoxy resins - Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry (DSC)

Introduction: It is possible to determine the degree of crosslinking of a crosslinked epoxy resin by observing changes in its mechanical, electrical or thermal properties. However, such an approach is inadequate in cases in which the test sample is to be evaluated as is or is to be examined under various crosslinking conditions. This document provides a method whereby the degree of crosslinking is determined without the need for complicated procedures for preparing, conditioning or configuring the test sample. The degree of crosslinking is determined by comparing the heat of the crosslinking reaction for the test sample with that of a reference sample, using a differential scanning calorimeter. The advantages of this method are that sample preparation is simple and measurements can be made with very small amounts of sample. For these reasons, this document is useful for investigations of, and in establishing conditions for, crosslinking reactions. It can also be used for production and quality control. Finally, since epoxy resin systems are highly diverse, the applicability of this document to each resin system needs be established. A technique to test the applicability to an epoxy resin system is included in this document. © ISO 2018 – All rights reserved

Scope: This document specifies a method whereby the heat of reaction generated during epoxy resin crosslinking is measured by differential scanning calorimetry (DSC). The degree of crosslinking is determined based on this result. This method is applicable to epoxy resin systems with a moderate or slow crosslinking-reaction speed. It might not be applicable to systems with a fast crosslinking-reaction speed at ambient temperature.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 14322-2018 PDF

ISO 14322-2018 PDF

$48.00 $96.00