Welding consumables — Procurement of filler materials and fluxes
Introduction: In production, the components of welding consumables are divided into discrete, predetermined quantities so that satisfactory tests with a sample from that quantity will establish that the entire quantity meets specification requirements. These quantities, known by such terms as heats, lots, blends, batches and mixes, vary in size according to the manufacturer. For identification purposes, each manufacturer assigns a unique designation to each quantity. This designation usually consists of a series of numbers or letters, or combinations thereof, which will enable the manufacturer to determine the date and time (or shift) of manufacture, the raw materials used, and the details of the procedures used in producing the welding consumable. This designation stays with the welding consumable and can be used to identify the material later, in those cases in which identification is necessary. © ISO 2024 – All rights reserved
Scope: This document specifies tools for communication between a purchaser and a supplier of welding consumables within quality systems, such as those based upon ISO 9001. This document, together with an applicable welding consumable standard (ISO or other), provides a method for preparing the specific details needed for welding consumable procurement which consists of: a) the welding consumable classification (selected from the applicable welding consumable standard); b) the lot classification (selected from Clause 4); c) the testing schedule (selected from Clause 5). Selection of the specific welding consumable classification, lot classification, and testing schedule depends upon the requirements of the application for which the welding consumable is being procured. This document does not apply to non-consumable electrodes or shielding gases.