Soil quality - Acid-base accounting procedure for acid sulfate soils - Part 2: Chromium reducible sulfur (CRS) methodology
Introduction: The objective of this part of ISO 14388 is to determine the net acidity (or alkalinity) of acid sulfate soils by providing a streamlined approach for determination of the various components of soil acidity and/or alkalinity, depending on pH. The chromium suite combines the measurement of chromium reducible sulfur (SCR) with various measures of existing acidity and acid neutralizing capacity (ANC) using a decision-tree based on the value of pHKCl (Figure 1) as the basis for determining an acid-base account for acid sulfate soils. The results required to determine net acidity vary with the soil’s actual acidity, as represented by pHKCl. Table A.1 of ISO 14388-1 shows the analyses required for the Chromium suite. This table uses results reported in acidity units. Alternatively, results in sulfur units can be utilized. Key acidity titration sulfur determination acid neutralising determination calculated parameter Figure 1 — Chromium suite flow diagram © ISO 2014 – All rights reserved
Scope: This part of ISO 14388 specifies a suite of methods used to determine the net acidity in acid sulfate soils. This part of ISO 14388 specifies a method for measuring chromium reducible sulfur (SCR) by iodimetric titration of distilled hydrogen sulfide trapped as zinc sulfide, following acidic chromous chloride digestion. This method determines inorganic sulfides (e.g. pyrite, marcasite, greigite, mackinawite) and elemental sulfur in acid sulfate soil without interferences from organic sulfur and oxidized forms of sulfur such as sulfate. On a separate test portion of soil, the pH in a 1 mol/l KCl soil suspension (pHKCl) is determined. When pHKCl is < 6,5, titratable actual acidity (TAA) is then determined. Subsequently, potassium chloride extractable sulfur (SKCl), calcium (CaKCl), and magnesium (MgKCl) can also be determined. Where jarosite is identified in the soil (or where pHKCl is < 4,5), net acid-soluble sulfur (SNAS) is determined by the difference between hydrochloric acid extractable sulfur (SHCl) and potassium chloride extractable sulfur. On samples where pHKCl is < 6,5, acid neutralizing capacity is determined by measuring either inorganic carbon (CIN) by combustion furnace, or ANCBT (ANC measured by back-titration of acid remaining following an acid digest).
Contents:
- Foreword
- Introduction
- Scope