ISO 14428-2019 PDF

ISO 14428-2019 PDF

Carbonaceous materials for the production of aluminium-Cold and tepid ramming pastes-Expansion/ shrinkage during baking

$48.00 $96.00 -50%
Product Code: ISO 14428
Stock In Stock
Edition: 2ND
Published: 11/2019
Number of Pages: 14
File Size: 1 file, 1 Byte

Available Options

Product Description

Carbonaceous materials for the production of aluminium — Cold and tepid ramming pastes — Expansion/ shrinkage during baking

Introduction: The expansion/shrinkage of ramming pastes used in the production of aluminium is an important property, because excessive shrinkage can cause cracks in the baked paste serving as a lining material in alumina electrolysis cells. These cracks can cause leakage of the liquid bath, destroying the sidewall lining and the steel shell and thus leading to shutdown of the cell. Ramming pastes change phase from plastic to non-plastic between 400 °C and 600 °C (200 °C and 300 °C for resin binders). The shrinkage which occurs between the temperature at which the paste becomes non-plastic and the operating temperature (950 °C) is an important factor. Apparent shrinkage in the viscous range is due to slumping rather than actual shrinkage. © ISO 2019 – All rights reserved

Scope: This document specifies the determination of expansion/shrinkage during baking of cold and tepid ramming pastes used in the production of aluminium.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 14428-2019 PDF

ISO 14428-2019 PDF

$48.00 $96.00