ISO 14490-9-2019 PDF

ISO 14490-9-2019 PDF

Optics and photonics-Test methods for telescopic systems-Part 9: Test methods for field curvature

$31.50 $63.00 -50%
Product Code: ISO 14490-9
Stock In Stock
Edition: 19
Published: 09/2019
Number of Pages: 12
File Size: 1 file, 982 Bytes

Available Options

Product Description

Optics and photonics — Test methods for telescopic systems — Part 9: Test methods for field curvature

Introduction: As mentioned in ISO 14490-7, there are several characteristics which determine image quality, besides the limit of resolution. One unmentioned characteristic there is field curvature which can be noted by the user as a field dependent defocus, which however could be refocused using the test specimen’s focusing facility. The intermediate image surface of a telescopic system (except Galilean systems) usually exhibits a curvature instead of being a plane surface, depending on the optical characteristics of the objective lens system. In addition, the surface can be split into two separate surfaces, the sagittal and tangential image surfaces. This surface, in turn, is being imaged by the eyepiece onto a virtual image surface (looked at by the user) which also can be split into two separate surfaces. Due to the optical characteristics of the eyepiece, the slope of the curvature of these surfaces might be different from those of the intermediate image surfaces. © ISO 2019 – All rights reserved

Scope: This document specifies the test method for the determination of the deviation from a flat image surface, i.e. the sagittal and tangential field curvature of telescopic systems and observational telescopic instruments.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 14490-9-2019 PDF

ISO 14490-9-2019 PDF

$31.50 $63.00