Space systems — Safety requirements — Part 1: System safety
Introduction: The ISO 14620 series is intended to be applied together for the management, engineering and product assurance in space projects and applications. The safety policy is implemented through a structured system safety programme supported by risk assessment. Hazardous system and environmental characteristics, as well as functions with potentially dangerous failure effects, are systematically identified and evaluated. Potential hazards are addressed through a reduction process in which they are first eliminated from design and operations, then minimized, and, if necessary, controlled and verified. Any residual risks are progressively assessed to ensure conformance to safety requirements, support design decisions, and in order to prioritise risk contributors, allocate resources, monitor progress in risk reduction, and inform safety-related decision-making. The effectiveness of hazard and risk control measures is formally verified to enable safety validation and risk acceptance. Finally, overall safety conformance is evaluated, and approval is obtained from the relevant authorities for both crewed and uncrewed projects. The imposition of these requirements on the project suppliers’ activities requires that the customer’s project product assurance and safety organization also respond to these requirements in a manner which is commensurate with the project’s safety criticality. Launch site operations are described by ISO 14620-2 and flight safety systems in ISO 14620-3. © ISO 2026 – Al
Scope: This document specifies the safety programme and the technical safety requirements that are implemented in order to conform to the safety policy defined in ISO 14300-2. It is intended to protect flight and ground personnel, the launch vehicle, associated payloads, ground support equipment, the general public, public and private property, and the environment from hazards associated with space systems. This document is applicable to all space projects where during any project phase there exists the potential for hazards to personnel or the general public, space flight systems, ground support equipment, facilities, public or private property, or the environment.