ISO 14635-2-2023 PDF

ISO 14635-2-2023 PDF

Gears-FZG test procedures-Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils

$96.50 $193.00 -50%
Product Code: ISO 14635-2
Stock In Stock
Edition: 2.
Published: 07/2023
Number of Pages: 26
File Size: 1 file, 2 Bytes

Available Options

Product Description

Gears — FZG test procedures — Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils

Introduction: The types of gear failures which can be influenced by the lubricant in use are scuffing, low-speed wear and the gear-surface fatigue phenomena known as micro- and macropitting. In the gear design process, these gear damages are taken into consideration by the use of specific lubricant and service- related characteristic values. For an accurate, field-related selection of these values, adequate lubricant test procedures are required. The FZG2) test procedures specified in this document, ISO 14635-1 and ISO 14635-3 can be regarded as tools for the determination of the lubricant-related characteristic values to be introduced into the load-carrying capacity calculation of gears. FZG test method A/8,3/90 for the relative scuffing load-carrying capacity of oils described in ISO 14635-1 is typical for the majority of applications in industrial and marine gears. This document is related to the relative scuffing load-carrying capacity of oils of very high extreme pressure (EP) properties, as used for the lubrication of automotive driveline components. Other FZG test procedures for the determination of low-speed wear, micro- and macropitting load-carrying capacity of gears are intended to be added to the ISO 14635 series as further parts. 2) FZG = Forschungsstelle für Zahnräder und Getriebebau, Technische Universität München (Gear Research Centre, Technical University, Munich). © ISO 2023 – All rights reserved

Scope: This document specifies a test method based on a FZG four-square test machine to determine the relative load-carrying capacity of high EP oils defined by the gear surface damage known as scuffing. This test method is useful for evaluating the scuffing load capacity potential of oils typically used with highly stressed cylindrical gearing found in many vehicle and stationary applications. It is not suitable for establishing the scuffing load capacity potential of oils used in highly loaded hypoid bevel gearing applications, for which purpose other methods are available in the industry. NOTE This method is technically equivalent to CEC L-84-02.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 14635-2-2023 PDF

ISO 14635-2-2023 PDF

$96.50 $193.00