Cleanrooms and associated controlled environments — Part 5 Operations
Introduction: Cleanrooms and associated controlled environments provide for the control of contamination to air and surface cleanliness levels appropriate for accomplishing contamination-sensitive activities. Consistent quality depends, in part, on cleanliness. Specified cleanliness levels for all contaminants addressed in the ISO 14644 series can be attained and maintained through a deliberate programme to establish and implement adequate design and operational procedures. Regulatory agencies that have authority over processes and products produced in the cleanroom can require additional procedures and measures. Processes and products that benefit from the control of contamination include those in industries such as aerospace, automotive, assorted consumer products, defence, microelectronics, optics, nuclear, scientific research and life sciences (pharmaceuticals, biotechnology, medical devices, food, healthcare). This document specifies basic requirements for cleanroom operations. It is intended for those who design, construct, start up or operate a cleanroom. For guidance about consumables and equipment used in cleanrooms refer to the ISO 14644 series. © ISO 2025 – All rights reserved
Scope: This document specifies requirements for the establishment of an operations control programme (OCP) to ensure efficient cleanroom operation within specified cleanliness levels. The OCP includes management of personnel, entry and exit of personnel and materials, cleaning, maintenance and monitoring. This document specifies operational requirements that relate to: — providing a system that specifies policies and operational procedures for maintaining cleanliness levels; — training of personnel; — transferring, installing and maintaining stationary equipment; — transferring material and portable equipment into and out of the cleanroom; — maintaining a personnel management programme that includes a gowning programme; — maintaining a cleaning programme that addresses special cleaning; — maintaining a cleanroom maintenance programme; — establishing an appropriate monitoring programme. This document gives additional information in annexes for: — personnel management; — gowning; — training; — cleaning. This document does not specifically address biocontamination control. For details on this topic, see ISO 14698-1 and ISO 14698-2. This document does not apply to the following topics: — aspects of health and safety management that have no direct bearing on contamination control; — specific requirements for individual industries; — specific requirements for equipment and materials used or associated with processes and products; — design details of equipment; — cleaning agent compatibility with cleanroom materials. © ISO 2025 – All rights reserved ISO 14644-5:2025(en) 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 14644-1, Cleanrooms and associated controlled environments — Part 1: Classification of air cleanliness by particle concentration ISO 14644-9, Cleanrooms and associated controlled environments — Part 9: Assessment of surface cleanliness for particle concentration ISO 14644-10, Cleanrooms