ISO 14644-7-2004 PDF

ISO 14644-7-2004 PDF

Cleanrooms and associated controlled environments Part 7: Separative devices (clean air hoods, gloveboxes, isolators and mini-environments)

$145.50 $291.00 -50%
Product Code: ISO 14644-7
Stock In Stock
Edition: 1ST
Published: 10/01/2004
Number of Pages: 52
File Size: 1 file, 874 Bytes

Available Options

Product Description

Cleanrooms and associated controlled environments Part 7: Separative devices (clean air hoods, gloveboxes, isolators and mini-environments)

Introduction: In the spirit of the generic requirements of an International Standard, the term “separative devices” was developed by Technical Committee ISO/TC 209 to encompass the wide continuum of configurations from open unrestricted air overspill to wholly contained systems. Common terms-of-trade, such as clean air hoods, gloveboxes, isolators and mini-environments, have different meanings depending on the specific industry. Difficulties experienced in the manufacture and handling of certain products or materials have driven the development of separative devices. These difficulties include product sensitivity to particles, chemicals, gases or microorganisms; operator sensitivity to the process materials or byproducts; and both product and operator sensitivity. Separative devices provide assured protection in varying levels by utilising physical or dynamic barriers, or both, to create separation between operation and operator. Certain processes may require special atmospheres to prevent degradation or explosions. Some systems may be capable of providing 100 % recirculation of the contained atmosphere to allow inert gas operation or biodecontamination with reactive gases. Usually people do not work directly inside the separative-device environment during production. These separative devices may be movable or fixed, and used for transport, transfer and process. The product or process, or both, are manipulated remotely with access devices either manually, with protection by barrier technol

Scope: This part of ISO 14644 specifies the minimum requirements for the design, construction, installation, test and approval of separative devices, in those respects where they differ from cleanrooms as described in ISO 14644-4 and 14644-5. The application of this part of ISO 14644 takes into account the following limitations.  User requirements are as agreed by customer and supplier.  Application-specific requirements are not addressed.  Specific processes to be accommodated in the separative-device installation are not specified.  Fire, safety and other regulatory matters are not considered specifically; where appropriate, national and local regulations apply. This part of ISO 14644 is not applicable to full-suits.

Contents:

  • Foreword
  • Introduction
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 14644-7-2004 PDF

ISO 14644-7-2004 PDF

$145.50 $291.00