Hydrogen fuel quality — Product specification
Introduction: In recent years, the landscape for using hydrogen as a fuel has changed significantly in response to its potential to contribute to the reduction of greenhouse gas emissions. This shift is influenced by challenges on both the hydrogen supply side, such as production technologies and supply chain infrastructure, and also the hydrogen energy usage side, including advancements in fuel cell and combustion technology. To address these changing conditions, the hydrogen fuel specifications in this document have been updated. The hydrogen fuel specifications for proton exchange membrane (PEM) fuel cell applications in this document are primarily based on research, development and data on the following items [2][3][4][5][6][7][8][9] [10][11][12][13][14]: — PEM fuel cell catalyst and fuel cell tolerance to hydrogen fuel impurities; — effects/mechanisms of impurities on fuel cell power systems and components; — impurity detection and measurement techniques for laboratory, production and in-field operations; — fuel cell vehicle demonstration and stationary fuel cell demonstration results. Grade D and grade E in this document are intended to apply to PEM fuel cells for road vehicles and stationary appliances, respectively. These aim to facilitate the provision of hydrogen of reliable quality balanced with acceptable lower cost for the hydrogen fuel supply. In addition, Grades F-1 and F-2 are newly specified in this edition to apply to hydrogen internal combustion engines for use in vehicu
Scope: This document specifies the minimum quality characteristics of hydrogen fuel as distributed for utilization in residential, commercial, industrial, vehicular and stationary applications. This document is applicable to hydrogen fuelling applications, which are listed in Table 2.