ISO 14720-2-2026 PDF

ISO 14720-2-2026 PDF

Testing of ceramic materials-Determination of sulfur in non-oxidic ceramic raw materials and ceramic materials-Part 2: Inductively coupled plasma optical emission spectrometry (ICP-OES) or ion chromatography (IC) after burning in the oxygen flow

$71.50 $143.00 -50%
Product Code: ISO 14720-2
Stock In Stock
Edition: 2.
Published: 03/2026
Number of Pages: 22
File Size: 1 file, 680 KB

Available Options

Product Description

Testing of ceramic materials — Determination of sulfur in non-oxidic ceramic raw materials and ceramic materials — Part 2: Inductively coupled plasma optical emission spectrometry (ICP-OES) or ion chromatography (IC) after burning in the oxygen flow

Scope: This document specifies a method for the determination of sulfur in non-oxidic ceramic raw materials and ceramic materials, which are completely oxidized at a higher temperature in an oxygen atmosphere, e.g. carbon and graphite materials. For materials which are not completely oxidizable under these conditions, it is possible to determine sulfur that can be released under these conditions, e.g. the adherent sulfur. This document is applicable for materials with mass fractions of sulfur ≤ 10 % and mass fractions of ash < 20 %, The defined method is limited for materials with mass fractions of barium < 10 mg/kg, because the sulfur bonded in barium sulfate is not detectable with this method. For the lower detection limit of this method, a mass fraction of sulfur of 0,5 mg/kg in the case of inductively coupled plasma optical emission spectrometry (ICP-OES) and 5 mg/kg in the case of ion chromatography (IC) can be considered as a practical value.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 14720-2-2026 PDF

ISO 14720-2-2026 PDF

$71.50 $143.00