Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide — Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test
Introduction: Management of plastics waste is a serious problem in the world. Plastics recovery technologies include material recovery (mechanical recycling, chemical or feedstock recycling, and biological or organic recycling) and energy recovery (heat, steam or electricity as a substitute for fossil fuels or other fuel resources). The use of biodegradable plastics is one valuable recovery option (biological or organic recycling). Several ISO standards for determining the ultimate aerobic/anaerobic biodegradability of plastic materials have been published. In particular, ISO 14855-1 is a common test method that measures the amount of carbon dioxide evolved using methods such as continuous infrared analysis, gas chromatography or titration. Compared with ISO 14855-1, the amounts of compost inoculum and test sample used in this document are one-tenth the size. In order to ensure the activity of the compost inoculum, inert material that gives the mixture the same texture as soil is mixed into the inoculum. The carbon dioxide evolved from the test vessel is determined by absorbing it in a carbon dioxide trap and carrying out gravimetric analysis of the absorbent. The method described in this document, which uses a closed system to capture the carbon dioxide evolved, can also be used to obtain valuable information, by means of isotopic-labelling studies, on the way in which the molecular structure of co-polymers degrades. In addition to traditional gravimetric methods, this test method adds a
Scope: This document specifies a method for determining the ultimate aerobic biodegradability of plastic materials under controlled composting conditions by gravimetric measurement of the amount of carbon dioxide evolved. The method is designed to yield an optimum rate of biodegradation by adjusting the humidity, aeration and temperature of the composting vessel. The method applies to the following materials: — natural and/or synthetic polymers and copolymers, and mixtures of these; — plastic materials that contain additives such as plasticizers or colorants; — water-soluble polymers; — materials that, under the test conditions, do not inhibit the activity of microorganisms present in the inoculum. NOTE If the test material inhibits microorganisms in the inoculum, another type of mature compost or pre- exposure compost can be used.