Graphic technology - Requirements for colour soft proofing systems
Introduction: The use of images displayed on a colour monitor is increasingly being used in the graphic arts industry for colour evaluation and colour acceptance (commonly referred to as “soft” proofing). This requires that the colour display and its associated viewing environment be able to simulate the appearance of the final printed image viewed under standard graphic arts viewing conditions. The major components required to accomplish this are assembled to create a soft proofing system which is usually comprised of a monitor, colour measurement device, driving software (for calibration, profiling the monitor, and displaying the data), and a viewing cabinet. The overall design and calibration has to control and take into account the influence of ambient lighting. As the use of soft proofing increases, the need for an objective and vendor neutral assessment of soft proofing systems is steadily increasing. This International Standard specifies requirements for systems that are used to produce, from digital data, images on electronic displays that are intended to simulate a characterized printing condition defined by a set of characterization data and spot colours defined by a physical reference. This International Standard builds on the monitor requirements defined in ISO 12646, the viewing cabinet defined in ISO 3664, and the requirements for contract hard copy proofing defined in ISO 12647-7. Three common soft proof scenarios are typically encountered. In the first scenario, a soft proo
Scope: This International Standard specifies requirements for systems that are used to produce, from digital data, images on electronic displays that are intended to simulate a characterized printing condition defined by a set of characterization data and spot colours defined by a physical reference. Recommendations are provided with regard to equipment selection, setup, operating, and environmental conditions. Appropriate test methods associated with these requirements are specified.