ISO 14993-2026 PDF

ISO 14993-2026 PDF

Corrosion of metals and alloys-Accelerated testing involving cyclic exposure to salt mist, dry and wet conditions

$71.50 $143.00 -50%
Product Code: ISO 14993
Stock In Stock
Edition: 3.
Published: 05/2026
Number of Pages: 22
File Size: 1 file, 570 KB

Available Options

Product Description

Corrosion of metals and alloys — Accelerated testing involving cyclic exposure to salt mist, dry and wet conditions

Introduction: Corrosion of metallic materials with or without corrosion protection is influenced by many environmental factors, the importance of which can vary depending on the type of metallic material and the type of environment. It is impossible, therefore, to design accelerated laboratory corrosion tests in such a way that all environmental factors influencing resistance to corrosion are taken into account. Laboratory tests are, therefore, designed to simulate the effects of the most important factors that enhance the corrosion of metallic materials, however it is not possible to design a laboratory corrosion test in such a way that complexity and variations of real, in-service conditions are fully represented. The accelerated corrosion test method described in this document is designed to simulate and enhance the environmental influence on a metallic material of exposure to an outdoor climate, where exposure to salt- contaminated conditions occurs and can promote corrosion. The test method involves cyclic exposure of test specimens to a mist of salt solution, to drying conditions and to periods of high humidity. They are not intended to be used for comparative testing or as a means of ranking different materials relative to each other with respect to corrosion resistance or as means of predicting long-term corrosion resistance of the tested material (merely for testing the whole product). The results obtained do not permit far-reaching conclusions on the corrosion resistance of the t

Scope: This document specifies the apparatus and test procedure to be used when conducting accelerated corrosion tests for the comparative quality evaluation of metallic materials with or without permanent corrosion protection or temporary corrosion protection in salt-contaminated outdoor environments. The test involves cyclic exposure of the specimens to neutral salt mist, “dry” and “wet” conditions. The type of test specimen and the exposure period are not specified. The particular advantages of this test over common accelerated tests such as the neutral salt spray (NSS) test lie in its ability to better reproduce the corrosion that occurs in outdoor salt-contaminated environments. This document is applicable to: — metals and their alloys; — metallic coatings (anodic and cathodic); — conversion coatings; — anodic oxide coatings; — organic coatings on metallic materials. NOTE Methods of test for coatings to determine their resistance, in the presence of scribe marks through to the substrate, to various cyclic corrosion conditions which include the condensation of water on the test specimens during periods of humidity are given in ISO 11997-1.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 14993-2026 PDF

ISO 14993-2026 PDF

$71.50 $143.00