ISO 14999-4-2026 PDF

ISO 14999-4-2026 PDF

Optics and photonics-Measurement of optical elements and optical systems-Part 4: Interpretation and evaluation of surface form and wavefront deformation tolerances specified in ISO 10110

$142.00 $284.00 -50%
Product Code: ISO 14999-4 (2026)
Stock In Stock
Edition: 3.
Published: 05/2026
Number of Pages: 40
File Size: 1 file, 5 MB

Available Options

Product Description

Optique et photonique - Mesurage interférométrique de composants et de systèmes optiques - Partie 4: Directives pour l’évaluation des tolérances spécifiées dans l’ISO 10110

Introduction: This document provides a theoretical frame upon which are based indications from ISO 10110-5 and/or ISO 10110-14. A table listing the corresponding nomenclature, functions, and values used in ISO 10110-5 and ISO 14999-4 is given in ISO 10110-5:2026, Annex B. ISO 10110-5 refers to deformations in the form of an optical surface and provides a means for specifying tolerances for certain types of surface deformations in terms of “nanometres”. ISO 10110-14 refers to deformations of a wavefront transmitted once through an optical system and provides a means of specifying similar deformation types in terms of nanometres or optical “wavelengths”. As it is common practice to measure the surface form deviation interferometrically as the wavefront deformation caused by a single reflection from the optical surface at normal (90° to surface) incidence, it is possible to describe a single definition of interferometric data reduction that can be used in both cases. One “fringe spacing” (as defined in ISO 10110-5) is equal to a surface deformation that causes a deformation of the reflected wavefront of one wavelength. Certain scaling factors apply depending on the type of interferometric arrangement, e.g. whether the test object is being measured in single pass or double pass. Due to the potential for confusion and misinterpretation, units of nanometres rather than units of “fringe spacings” or “wavelengths” are to be used for the value of surface form deviation or the value of wavefront def

Scope: This document applies to the interpretation of data relating to the measurement of the surface form deviations of optical elements or the wavefront deformations of optical systems. Often the measurement data are generated by using interferometric techniques, but other measurement techniques also generate measurement data to describe the surface form deviations or wavefront deformations. This document gives definitions of the optical functions and values specified in the preparation of drawings for optical elements and systems, made in accordance with ISO 10110-5 and/or ISO 10110-14 for which the corresponding nomenclature, functions, and values are listed in ISO 10110-5:2026, Annex B.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 14999-4-2026 PDF

ISO 14999-4-2026 PDF

$142.00 $284.00