Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 4: General requirements
Introduction: Welding and allied processes generate fumes and gases which, if inhaled, can be harmful to human health. Therefore, control of the fumes and gases generated is to be exercised to minimize worker exposure. The most effective method of control is to capture the fumes and gases close to their source before they enter a worker’s breathing zone or the general workplace environment. Ventilation equipment used to capture the fumes and gases is to be fit for purpose because inefficient capture could result in high exposure and can be detrimental to workers’ health. It is important therefore that it adheres to defined manufacturing, materials and design requirements and gives warning of malfunction. This part of ISO 15012 defines the general requirements that are necessary for ventilation equipment to maintain exposure to fumes at acceptable levels. This part of ISO 15012 is a type-B standard as stated in ISO 12100. This part of ISO 15012 is of relevance, in particular, for the following stakeholder groups representing the market players with regard to machinery safety: — machine manufacturers (small, medium and large enterprises); — health and safety bodies (regulators, accident prevention organizations, market surveillance, etc.). Others can be affected by the level of machinery safety achieved with the means of this part of ISO 15012 by the above-mentioned stakeholder groups: — machine users/employers (small, medium and large enterprises); — machine users/employees (e.g. trade unio
Scope: This part of ISO 15012 defines the general requirements for ventilation equipment used to control exposure to fumes generated by welding and allied processes. It applies to the design and manufacture of all parts of the equipment including hoods, ducting, filter units, air movers, systems that inform of unsafe operation and workplace practices to ensure safe working with regard to exposure. Significant hazards are listed in Clause 4. It does not cover electrical, mechanical and pneumatic hazards. This part of ISO 15012 is applicable to the following: — local exhaust ventilation systems (LEV); — mobile and stationary equipment. This part of ISO 15012 is not applicable to the following: — general ventilation, air make up or air movement systems; — air conditioning systems; — separation of gases generated by or used by welding and allied processes; — LEV used for welding and allied processes that generate reactive potentially explosive particles and atmospheres; — grinding dust. This part of ISO 15012 applies to systems designed and manufactured after its publication.