ISO 15025-2016 PDF

ISO 15025-2016 PDF

Protective clothing - Protection against flame - Method of test for limited flame spread

$96.50 $193.00 -50%
Product Code: ISO 15025
Stock In Stock
Edition: 2ND
Published: 12/01/2016
Number of Pages: 28
File Size: 1 file, 827 Bytes

Available Options

Product Description

Protective clothing - Protection against flame - Method of test for limited flame spread

Introduction: The first edition of this document was initially prepared by ISO/TC 38/SC 19 as part of the revision of ISO 6940 and ISO 6941. This specific work item was transferred to Technical Committee ISO/TC 94/SC 13 in April 1997. This method of test is closely related to the method of test specified in ISO 6941. It uses the same basic equipment but narrower specimen holders and templates for one procedure. Materials which do not burn to the upper or vertical edges of the test specimen used in this test may be classified as producing limited flame spread. This method assesses the properties of textile fabrics in response to a short contact with a small igniting flame under controlled conditions. The influence of seams on the behaviour of fabrics can be determined by this method, the seam being positioned within the test specimen so as to be subjected to the test flame. Whenever practicable, trimmings should be tested as part of the fabric assembly on which they are or will be used. A list of standards related to this document is given in the Bibliography. © ISO 2016 – All rights reserved

Scope: This document specifies two procedures (surface ignition and bottom-edge ignition) for determining flame spread properties of vertically oriented flexible materials in the form of single or multicomponent fabrics (coated, quilted, multilayered, sandwich constructions and similar combinations), when subjected to a small defined flame. This test standard does not apply to situations where there is restricted air supply or exposure to large sources of intense heat, for which other test methods are more appropriate. This test method is not appropriate for materials that demonstrate extensive melting or shrinkage.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 15025-2016 PDF

ISO 15025-2016 PDF

$96.50 $193.00