ISO 15031-3-2023 PDF

ISO 15031-3-2023 PDF

Road vehicles-Communication between vehicle and external equipment for emissions-related diagnostics-Part 3: Diagnostic connector and related electrical circuits: Specification and use

$60.00 $120.00 -50%
Product Code: ISO 15031-3
Stock In Stock
Edition: 3.
Published: 02/2023
Number of Pages: 12
File Size: 1 file, 1 Byte

Available Options

Product Description

Véhicules routiers - Communications entre un véhicule et un équipement externe pour le diagnostic relatif aux émissions - Partie 3: Connecteur de diagnostic et circuits électriques associés: spécifications et utilisation

Introduction: The ISO 15031 series consists of a number of parts which, taken together, provide a coherent self- consistent set of specifications to facilitate emissions-related diagnostics. ISO 15031-1 provides an overview about communication between vehicle and external equipment for emissions-related diagnostics. ISO 15031-2 through ISO 15031-7 are based on SAE recommended practices. This document is based on SAE J1962 (diagnostic connector). The first edition of this document was based on SAE J1962 and was intended to meet European OBD requirements for 2000 and later model year vehicles, and added a modified connector type to accommodate vehicles with a 24 V system. The ISO 15031 series includes the communication between the vehicle's on-board diagnostic (OBD) systems and test equipment implemented across vehicles within the scope of the legislated emissions- related OBD. To achieve this, it is based on the Open Systems Interconnection (OSI) Basic Reference Model in accordance with ISO/IEC 7498-1 and ISO/IEC 10731: — data link layer: — ISO 11898-1; — SAE J1850; — ISO 9141-2; — ISO 14230-2; — ISO 26021-1. — physical layer: — ISO 11898-1, ISO 11898-2; — SAE J1850; — ISO 9141-2; — ISO 14230-1; — ISO 26021-1. Figure 1 illustrates this document's reference according to the OSI model. © ISO 2023 – All rights reserved

Scope: This document references the latest publication of SAE J1962. On-board diagnostic (OBD) regulations require road vehicles to be equipped with a standardized connector for purposes of access to OBD information by external test equipment. This document describes the requirements for the physical connection and associated pin usage to allow for standard access to the OBD data. This document is technically equivalent to SAE J1962 with the exception of the specific requirements identified and the specification of additional requirements related to right hand driven (RHD) vehicles.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 15031-3-2023 PDF

ISO 15031-3-2023 PDF

$60.00 $120.00