Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 5: Emissions-related diagnostic services
Introduction: Overview ISO 15031 consists of a number of parts which, taken together, provide a coherent self-consistent set of specifications to facilitate emissions-related diagnostics. ISO 15031-1 provides an introduction to the series of International Standards. ISO 15031-2 through ISO 15031-7 are based on SAE recommended practices. This part of ISO 15031 is based on SAE J1979. This International Standard includes the communication between the vehicle’s On-Board Diagnostic (OBD) systems and test equipment implemented across vehicles within the scope of the legislated emissions-related OBD. To achieve this, it is based on the Open Systems Interconnection (OSI) Basic Reference Model in accordance with ISO/IEC 7498-1 and ISO/IEC 10731, which structures communication systems into seven layers. When mapped on this model, the services specified by this International Standard are broken into the following layers in accordance with Table 1. — Diagnostic services (layer 7), specified in the following: — this part of ISO 15031; — ISO 27145-3 (WWH-OBD). — Presentation layer (layer 6), specified in the following: — ISO 15031-2, SAE J1930-DA; — this part of ISO 15031, SAE J1979-DA; — ISO 15031-6, SAE J2012-DA; — ISO 27145-2, SAE J2012-DA. — Session layer services (layer 5), specified in the following: — ISO 14229-2 supports ISO 15765-4 DoCAN and ISO 14230-4 DoK-Line protocols; — ISO 14229-2 is not applicable to the SAE J1850 and ISO 9141-2 protocols. — Transport layer services (layer 4), specified
Scope: This part of ISO 15031 is intended to satisfy the data reporting requirements of On-Board Diagnostic (OBD) regulations in the United States and Europe and any other region that may adopt similar requirements in the future. This part of ISO 15031 specifies a) message formats for request and response messages, b) timing requirements between request messages from external test equipment and response messages from vehicles and between those messages and subsequent request messages, c) behaviour of both the vehicle and external test equipment if data are not available, and d) a set of diagnostic services, with corresponding content of request and response messages, to satisfy OBD regulations. This part of ISO 15031 includes capabilities required to satisfy OBD requirements for multiple regions, model years, engine types, and vehicle types. Those regulations are not yet final for some regions and are expected to change in the future. This part of ISO 15031 makes no attempt to interpret the regulations and does not include applicability of the included diagnostic services and data parameters for various vehicle applications. The user of this part of ISO 15031 is responsible for verifying the applicability of each clause of this part of ISO 15031 for a specific vehicle, engine, model year, and region. This part of ISO 15031 specifies diagnostic services and functionally addressed request/response messages required to be supported by motor vehicles and external test equipment for diagnostic purposes which pertain to motor vehicle emission-related data. Any external test equipment meeting the requirements of ISO 15031-4 use these messages to retrieve emissions-related information from the vehicle. Each clause in this part of ISO 15031 which specifies additional details to existing clauses of ISO 9141-2, ISO 14230-4, SAE J1850, and ISO 15765-4 supersede those specifications. This part of ISO 15031 references SAE J1979-DA (Digital Annex), which includes all definitions of PIDs, OBDMIDs, TIDs, and INFOTYPEs. This part of ISO 15031 provides the mechanism to satisfy the requirements included in the country- specific regulations and not all capabilities included in this part of