ISO 15086-3-2022 PDF

ISO 15086-3-2022 PDF

Hydraulic fluid power-Determination of the fluid-borne noise characteristics of components and systems-Part 3: Measurement of hydraulic impedance

$60.00 $120.00 -50%
Product Code: ISO 15086-3
Stock In Stock
Edition: 2ND
Published: 07/2022
Number of Pages: 32
File Size: 1 file, 1 Byte

Available Options

Product Description

Transmissions hydrauliques - Évaluation des caractéristiques du bruit liquidien des composants et systèmes - Partie 3: Mesurage de l'impédance hydraulique

Introduction: In hydraulic fluid power systems, power is transmitted and controlled through a liquid under pressure within a closed circuit. During the process of converting mechanical power into fluid power, fluid-borne noise (flow ripple and pressure ripple) is generated. This in turn leads to structure-borne noise and airborne noise. The transmission of fluid-borne noise is influenced by the impedance of the components installed in the hydraulic circuit. This document adopts the concepts of ISO 15086-1 which describe the basis for the methods of measurement that make it possible to determine the characteristics of fluid-borne noise emitted or transmitted by hydraulic transmission systems. Clause 6 of this document describes the method for measuring the hydraulic impedance of a single-port component (local hydraulic impedance) and Clause 7 describes the method for measuring the hydraulic impedance matrix of a two-port hydraulic component. © ISO 2022 – All rights reserved

Scope: This document describes the procedure for determining the impedance characteristics of hydraulic components by means of measurements from pressure transducers mounted in a pipe. This document is applicable to passive components, irrespective of size, operating under steady-state conditions, over a frequency range from 10 Hz to 3 kHz.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 15086-3-2022 PDF

ISO 15086-3-2022 PDF

$60.00 $120.00