ISO 15156-2-2020 PDF

ISO 15156-2-2020 PDF

Petroleum and natural gas industries-Materials for use in H2Scontaining environments in oil and gas production-Part 2: Cracking-resistant carbon and lowalloy steels, and the use of cast irons

$129.00 $258.00 -50%
Product Code: ISO 15156-2
Stock In Stock
Edition: 4TH
Published: 11/2020
Number of Pages: 56
File Size: 1 file, 1 Byte

Available Options

Product Description

Petroleum and natural gas industries — Materials for use in H2Scontaining environments in oil and gas production — Part 2: Cracking-resistant carbon and lowalloy steels, and the use of cast irons

Introduction: The consequences of sudden failures of metallic oil and gas field components, associated with their exposure to H2S-containing production fluids, led to the preparation of the first edition of NACE MR0175, which was published in 1975 by the National Association of Corrosion Engineers, now known as NACE International. The original and subsequent editions of NACE MR0175 established limits of H2S partial pressure above which precautions against sulfide stress cracking (SSC) were always considered necessary. They also provided guidance for the selection and specification of SSC-resistant materials when the H2S thresholds were exceeded. In more recent editions, NACE MR0175 has also provided application limits for some corrosion-resistant alloys, in terms of environmental composition and pH, temperature and H2S partial pressures. In separate developments, the European Federation of Corrosion issued EFC Publication 16 in 1995 and EFC Publication 17 in 1996. These documents are generally complementary to those of NACE though they differed in scope and detail. In 2003, the publication of the ISO 15156-series and NACE MR0175/ISO 15156 was completed for the first time. These technically identical documents utilized the above sources to provide requirements and recommendations for materials qualification and selection for application in environments containing wet H2S in oil and gas production systems. They are complemented by NACE TM0177 and NACE TM0284 test methods. The revision of thi

Scope: This document gives requirements and recommendations for the selection and qualification of carbon and low-alloy steels for service in equipment used in oil and natural gas production and natural gas treatment plants in H2S-containing environments, whose failure can pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help to avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials requirements of the appropriate design codes, standards or regulations. This document addresses the resistance of these steels to damage that can be caused by sulfide stress cracking (SSC) and the related phenomena of stress-oriented hydrogen-induced cracking (SOHIC) and soft-zone cracking (SZC). This document also addresses the resistance of these steels to hydrogen-induced cracking (HIC) and its possible development into stepwise cracking (SWC). This document is concerned only with cracking. Loss of material by general (mass loss) or localized corrosion is not addressed. Table 1 provides a non-exhaustive list of equipment to which this document is applicable, including exclusions. This document applies to the qualification and selection of materials for equipment designed and constructed using load controlled design methods. For design utilizing strain-based design methods, see ISO 15156-1:2020, Clause 5. Annex A lists SSC-resistant carbon and low alloy steels, and A.2.4 includes requirements for the use of cast irons. This document is not necessarily suitable for application to equipment used in refining or downstream processes and equipment. INTERNATIONAL STANDARD ISO 15156-2:2020(E) © ISO 2020 – All rights reserved ISO 15156-2:2020(E) Table 1 — List of equipment This document is applicable to materials used for the following equipment Exclusions Drilling, well construction and well-servicing equipment Equipment exposed only to drilling fluids of controlled compositiona Drill bits Blowout preventer (BOP) shear bladesb Drilling riser systems Work strings Wireline and wireline equipmentc Surface and intermediate casing Wells, including subsurface equipment, gas lift equipment,

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 15156-2-2020 PDF

ISO 15156-2-2020 PDF

$129.00 $258.00