ISO 15379-1-2019 PDF

ISO 15379-1-2019 PDF

Carbonaceous materials for the production of aluminium-Cathode block materials-Part 1: Determination of the expansion due to sodium penetration with application of pressure

$31.50 $63.00 -50%
Product Code: ISO 15379-1
Stock In Stock
Edition: 3RD
Published: 12/2019
Number of Pages: 14
File Size: 1 file, 1 Byte

Available Options

Product Description

Carbonaceous materials for the production of aluminium — Cathode block materials — Part 1: Determination of the expansion due to sodium penetration with application of pressure

Introduction: Expansion due to sodium penetration is an important property of carbon cathode blocks. As soon as alumina electrolysis starts, sodium penetrates into the carbon cathode blocks causing swelling of these blocks. This increase in volume creates mechanical stresses within the blocks and/or bulging of the bottom block plate. This can lead to cracks through which liquid aluminium and/or liquid electrolyte can flow, reaching the thermal insulation beneath the blocks and destroying these ceramic materials. In such cases, the electrolysis cell has to be relined, resulting in loss of aluminium production and high expenses. Therefore, cathode blocks produced with materials allowing only low sodium penetration and with the lowest possible expansion due to sodium penetration are preferred. The study can be supplemented by measuring electrical resistivity (see ISO 11713) before and after the test. Due to thermal and sodium expansion when heating up the cathode blocks in the electrolysis cells to operational temperature, the block will be subject to pressure from the steel shell; therefore, in the present method, 5 MPa is chosen as a realistic maximum pressure. © ISO 2019 – All rights reserved

Scope: This document specifies a method that covers the determination of linear expansion under external pressure due to sodium penetration in cathode-block materials used in the production of aluminium. The linear expansion of the blocks depends on the sampling direction due to anisotropy.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 15379-1-2019 PDF

ISO 15379-1-2019 PDF

$31.50 $63.00