Road vehicles — Design and performance specifications for the WorldSID 50th percentile male side-impact dummy — Part 3: Mechanical requirements for electronic subsystems
Introduction: This third edition of the ISO 15830 series has been prepared on the basis of the existing design, specifications, and performance of the WorldSID 50th percentile adult male side-impact dummy. The purpose of the ISO 15830 series is to document the design and specifications of this side-impact dummy in a form suitable and intended for worldwide regulatory use. In 1997, the WorldSID 50th percentile adult male dummy development was initiated, with the aims of defining a global-consensus side-impact dummy, with more humanlike anthropometry, improved biofidelity, and increased injury-monitoring capabilities, suitable for example, for regulatory use. Participating in the development were research institutes, dummy and instrumentation manufacturers, governments, and vehicle manufacturers from around the world. The original WorldSID drawings were available in electronic format. The updates are not available. In order to apply the ISO 15830 series properly, it is important that all four parts be used together. © ISO 2022 – All rights reserved
Scope: This document specifies mechanical requirements for sensors and in-dummy data acquisition systems (DAS) of the WorldSID 50th percentile side-impact dummy, a standardized anthropomorphic dummy for near-side-impact tests of road vehicles.