Systèmes spatiaux - Méthodes d'essai générales pour véhicules spatiaux, sous-systèmes et équipements
Introduction: Throughout this document, the minimum essential criteria are identified by the use of the keyword “shall”. Recommended criteria are identified by the use of the keyword “should” and, while not mandatory, are considered to be of primary importance in providing serviceable, economical and practical designs. Deviations from the recommended criteria should occur only after careful consideration, extensive testing and thorough service evaluation have shown alternative methods to be satisfactory. The acceptance criteria, specifications or procedures, and other detail test requirements applicable to a particular programme are defined in the applicable technical specifications and statement of work. When requirements have to be verified by measuring product performance and function under various simulated environments, the method is referred to as “Test”. The requirements of this document may be tailored for each specific space programme application. viii © ISO 2021 – All rights reserved
Scope: This document provides the baseline standard on the subject of testing at the system, subsystem and unit levels for applicable unmanned spacecraft programmes. It also provides the requirements for documentation associated with testing activities. This document contains provisions for qualification and acceptance testing, or proto-flight testing (PFT). It assumes that hardware development is complete.