ISO 15875-1-2025 PDF

ISO 15875-1-2025 PDF

Plastics piping systems for hot and cold water installations-Crosslinked polyethylene (PE-X)-Part 1: General

$48.00 $96.00 -50%
Product Code: ISO 15875-1
Stock In Stock
Edition: 2.
Published: 10/2025
Number of Pages: 18
File Size: 1 file, 1 Byte

Available Options

Product Description

Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 1: General

Introduction: The ISO 15875 series specifies the requirements for a piping system when pipes are made from crosslinked polyethylene (PE-X). The ISO 15875 series consists of ISO 15875-1, ISO 15875-2, ISO 15875-3 and ISO 15875-5 and covers the requirements and related test methods for all components used in the system (e. g. pipes and fittings). In addition, the ISO 15875 series includes requirements and related test methods to verify the performance and compatibility of the jointing of components. The piping system is intended to be used for hot and cold water installations. In respect of potential adverse effects on the quality of water intended for human consumption, caused by the product covered by the ISO 15875 series: — the ISO 15875 series provides no information concerning potential restrictions on the use of the product in any of the Member States of the EU or EFTA; Requirements and test methods for material and components of the piping systems are specified in ISO 15875-2 and ISO 15875-3. Characteristics for fitness for purpose (mainly for joints) are covered in ISO 15875-5. ISO/TS 15875-7 gives guidance for the assessment of conformity. This document specifies the general aspects of the plastics piping system. This document is intended to be used only in conjunction with the other parts of the ISO 15875 series, which are applicable to PE-X pipes, fittings and their joints including joints with components made of other plastics and non-plastics materials intended to be used for hot

Scope: This document specifies the general aspects of crosslinked polyethylene (PE-X) piping systems intended to be used for hot and cold water installations within buildings for the conveyance of water, whether or not intended for human consumption (domestic systems), and for heating systems, under design pressures and temperatures according to the class of application (see Table 1). This document also specifies the basis for the test parameters for the test methods referred to in the ISO 15875 series. This document covers a range of service conditions (application classes), design pressures and pipe dimension classes. The ISO 15875 series does not apply to values of design temperature (TD), maximum temperature (Tmax) and malfunction temperature (Tmal), as well as service times in excess of those defined in Table 1.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 15875-1-2025 PDF

ISO 15875-1-2025 PDF

$48.00 $96.00