ISO 16000-42-2023 PDF

ISO 16000-42-2023 PDF

Indoor air-Part 42: Measurement of the particle number concentration by condensation particle counters

$113.50 $227.00 -50%
Product Code: ISO 16000-42
Stock In Stock
Edition: 1.
Published: 08/2023
Number of Pages: 42
File Size: 1 file, 1 Byte

Available Options

Product Description

Indoor air — Part 42: Measurement of the particle number concentration by condensation particle counters

Introduction: People spend most of their day indoors where they are exposed to various sources of particles. Such particles can be dust particles, particles from combustion processes such as candles, cooking and fireplaces. Particles can also be emitted by do-it-yourself activities and the operation of electrical equipment such as printers. Classical building envelope materials are not efficient to prevent particle transport between indoor and outdoor environments. Sources of outdoor particles are various and include traffic and other combustion processes, and industrial and agricultural activities. Air exchanges are driven by natural infiltration and ventilation, but also mechanical ventilation present in the building. All this can result in highly variable levels of indoor particles concentration that are not easily ascertained or assessed in terms of their impacts on health. Epidemiological studies have shown that ultrafine particles (UFP) can have a negative impact on peoples' health.[1] Due to their very small size they can indeed penetrate deeply into the human body. Particle measurement instrumentation allows determining either the total particle number concentration or the particle number size distribution. This document describes the general strategies for the measurement of indoor sub-micron particles with the focus on determining the total number concentration. This document was prepared in response to the need for improved comparability of methods for particle measurement.  ©

Scope: This document specifies the measurement methods and strategies for determining the total number of airborne particles per unit volume of air indoor, using a condensation particle counter (CPC) for particles approximately between 10 nm to 3 µm. NOTE As the particle number concentration is usually dominated by the ultrafine particle (UFP) fraction, the obtained result can be used as an approximation of the UFP concentration. Quality assurance, determination of the measurement uncertainty and minimal reporting information are also discussed in this document. This document is applicable to indoor environments as specified in ISO 16000-1. This document does not address the determination of bioaerosols or the chemical characterization of particles. Nevertheless, some bioaerosols can be detected by the CPC and then contribute to the measured count of particles.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 16000-42-2023 PDF

ISO 16000-42-2023 PDF

$113.50 $227.00