ISO 16075-3-2021 PDF

ISO 16075-3-2021 PDF

Guidelines for treated wastewater use for irrigation projects-Part 3: Components of a reuse project for irrigation

$60.00 $120.00 -50%
Product Code: ISO 16075-3
Stock In Stock
Edition: 2ND
Published: 05/2021
Number of Pages: 46
File Size: 1 file, 3 Bytes

Available Options

Product Description

Lignes directrices pour l’utilisation des eaux usées traitées en irrigation - Partie 3: Éléments d’un projet de réutilisation en irrigation

Introduction: The increasing water scarcity and water pollution control efforts in many countries have made treated municipal and industrial wastewater a suitable economic means of augmenting the existing water supply, especially when compared to expensive alternatives such as desalination or the development of new water sources involving dams and reservoirs. Water reuse makes it possible to close the water cycle at a point closer to cities by producing “new water” from municipal wastewater and reducing wastewater discharge to the environment. An important new concept in water reuse is the “fit-to-purpose” approach, which entails the production of reclaimed water quality that meets the needs of the intended end-users. In the situation of reclaimed water for irrigation, the reclaimed water quality can induce an adaptation of the type of plant grown. Thus, the intended water reuse applications are to govern the degree of wastewater treatment required and inversely, the reliability of wastewater reclamation processes and operation. Treated wastewater can be used for various non-potable purposes. The dominant applications for the use of treated wastewater (also referred to as reclaimed water or recycled water) include agricultural irrigation, landscape irrigation, industrial reuse, and groundwater recharge. More recent and rapidly growing applications are for various urban, recreational, and environmental uses, and indirect and direct potable reuse. Agricultural irrigation was, is, and will li

Scope: This document covers the system's components needed for the use of treated wastewater (TWW) for irrigation. Emphasis is placed on irrigation methods, mainly drip irrigation, as this method represents an efficient method of irrigation and water saving, while reducing the pollution of the crops. Despite the fact that water quality and filtration of treated wastewater (herein TWW) using drip irrigation are critical, open irrigation systems are more popular and are frequently used for irrigation with TWW and therefore are covered in this document. This document covers issues related to the main components of a TWW irrigation project, including the following: — pumping stations; — storage reservoirs; — treatment facilities (for irrigation purposes); — filtration and disinfection; — distribution pipeline networks; — water application devices: irrigation system components and treatment. This document is not intended to be used for certification purposes.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 16075-3-2021 PDF

ISO 16075-3-2021 PDF

$60.00 $120.00