ISO 16094-2-2025 PDF

ISO 16094-2-2025 PDF

Water quality-Analysis of microplastic in water-Part 2: Vibrational spectroscopy methods for waters with low content of suspended solids including drinking water

$113.50 $227.00 -50%
Product Code: ISO 16094-2
Stock In Stock
Edition: 1.
Published: 09/2025
Number of Pages: 42
File Size: 1 file, 2 Bytes

Available Options

Product Description

Water quality — Analysis of microplastic in water — Part 2: Vibrational spectroscopy methods for waters with low content of suspended solids including drinking water

Introduction: Pollution linked to microplastics is recognized as a global phenomenon. The standardization of the sampling, quantification and identification protocols is required to ensure reliability and comparability of the data produced for health and environmental risk assessments. Microplastics in water can be identified and quantified using various methodological approaches. Depending on the measurement objectives, several complementary approaches shall be used to cover the full spectrum of microplastics (size and chemical nature). Table 1 resumes the characteristics and the information obtained with spectroscopic techniques. Table 1 — Characteristics of the various analytical techniques and information obtained. Characteristics and information ob tained Raman micro spectroscopy Infrared micro spectroscopy Type of sample Water filtrate residues Chemical nature of the polymer Yes Information provided by analytical technique Functional groups Results expression Polymer type, number of particles, size of particles Minimum measurable size range of particles 1 µm to 5 µm 20 µm Minimum mass subject to measure ment after preparation Undefined Consequences for the test sample after measurement Non-destructive Main interferences mineral particles, coloured par ticles, pigments, fluorescence, fatty acids, fatty amides, proteins, surface alterations by biofilms or weathering, carbohydrates, gener ated by microbes mineral particles, proteins, surface alterations by biofilms or weathering, partic

Scope: This document establishes key principles for the investigation of microplastics in drinking water and water with low content of natural suspended solids using a microscopy technique coupled with vibrational spectroscopy. This method is applicable to: — determine the size of microplastics [which range from 1 µm to 5 000 µm], count them and classify them by size range; — identify the chemical composition of microplastics, the main ones (most used in industry and most abundant in the environment) being: polyethylene (PE), polypropylene (PP), polyethylene terephthalate (PET), polycarbonate (PC), polystyrene (PS), polytetrafluoroethylene (PTFE), polyvinyl chloride (PVC), polyamide (PA), polymethyl methacrylate (PMMA) and polyurethane (PU); This method is applicable to water with a low content of organic matter and other suspended matter as defined in ISO 6107 (1 mg/l to 100 mg/l or lower when interfering with the determination), i.e., — ultrapure water; — water intended for human consumption; — raw groundwaters. Given the very low concentrations of microplastics usually present in these waters, special attention needs to be paid to potential sources of contamination during sample preparation. This method is intended to determine and characterize large numbers of particles in the sample in automatic mode. This method can also identify the nature of the other particles that are outside the scope of this document, for example minerals, proteins, cellulose and pigments. This method does not apply to the characterization of substances intentionally added to or adsorbed on the surface of microplastics. This method does not apply to the determination of the geometric shape of microplastics. © ISO 2025 – All rights reserved ISO 16094-2:2025(en) 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 14644-1:2015, Cleanrooms and associated controlled environments — Part 1: Classification of air cleanliness

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 16094-2-2025 PDF

ISO 16094-2-2025 PDF

$113.50 $227.00