ISO 16140-7-2024 PDF

ISO 16140-7-2024 PDF

Microbiology of the food chain-Method validation-Part 7: Protocol for the validation of identification methods of microorganisms

$113.50 $227.00 -50%
Product Code: ISO 16140-7
Stock In Stock
Edition: 1.
Published: 11/2024
Number of Pages: 44
File Size: 1 file, 3 Bytes

Available Options

Product Description

Microbiology of the food chain — Method validation — Part 7: Protocol for the validation of identification methods of microorganisms

Introduction: 0.1 The ISO 16140 series The ISO 16140 series has been expanded in response to the need for various ways to validate or verify test methods. It is the successor to ISO 16140:2003. The ISO 16140 series consists of several parts with the general title, Microbiology of the food chain — Method validation: — Part 1: Vocabulary; — Part 2: Protocol for the validation of alternative (proprietary) methods against a reference method; — Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory; — Part 4: Protocol for method validation in a single laboratory; — Part 5: Protocol for factorial interlaboratory validation for non-proprietary methods; — Part 6: Protocol for the validation of alternative (proprietary) methods for microbiological confirmation and typing procedures; — Part 7: Protocol for the validation of identification methods of microorganisms. ISO 17468 is a closely linked International Standard, which establishes technical rules for the development and validation of standardized methods. In general, two stages are needed before a method can be used in a laboratory. — The first stage is the validation of the method. Validation is conducted using a study in a single laboratory followed by an interlaboratory study (see ISO 16140-2, ISO 16140-5, ISO 16140-6 and as described in this document). In the case when a method is validated within one laboratory (see ISO 16140-4), no interlaboratory study is conducted. — The secon

Scope: This document specifies the general principle and the technical protocol for the validation of identification methods of microorganisms for microbiology in the food chain. As there is no reference method, no method comparison study can be run. Therefore, this document provides a protocol to evaluate the performance characteristics and validate the method workflow using well-defined strains. When required, an additional identification method can be used. This document is applicable to the validation of identification methods of microorganisms that are used for the analysis of isolated colonies from: — products intended for human consumption; — products for feeding animals; — environmental samples in the area of food and feed production and handling; — samples from the primary production stage. Identification methods only validated in accordance with this document cannot be used instead of confirmation described in: — the reference method; — an alternative method validated in accordance with ISO 16140-2; — an alternative method validated in accordance with ISO 16140-6. In these instances, the identification method is validated in accordance with ISO 16140-6 method that is used as a confirmation method. This document is applicable to bacteria and fungi. Some clauses can be applicable to other (micro)organisms, which can be determined on a case-by-case basis.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 16140-7-2024 PDF

ISO 16140-7-2024 PDF

$113.50 $227.00