Workplace air - Analysis of respirable crystalline silica by X-ray diffraction - Part 1: Direct-on-filter method
Introduction: Respirable crystalline silica (RCS) is a hazard to the health of workers in many industries through exposure by inhalation. Industrial hygienists and other public health professionals need to determine the effectiveness of measures taken to control workers’ exposure. The collection of samples of air during a work activity and then measuring the amount of respirable crystalline silica are often done to assess an individual’s exposure, the effectiveness of controls or their respiratory protection. X-ray diffraction (XRD) analysis of crystalline silica in a sample of respirable dust collected on a filter is the principle technique employed in many countries to measure and estimate exposure to RCS. X-ray diffraction is able to clearly distinguish the polymorphs of crystalline silica. This part of ISO 16258 specifies the procedure for a method of analysing RCS directly on the air sample filter. A specific requirement of this method is that the filter from the sampling apparatus has a diameter of 25 mm. The method also discusses optimum instrumental parameters, for various types of detectors in common use at the time of publication. This part of ISO 16258 is to be used in conjunction with ISO 24095 which promotes best practice for these analyses. vi © ISO 2015 – All rights reserved
Scope: This part of ISO 16258 specifies the analysis of respirable crystalline silica (RCS) in samples of air collected on 25 mm-filters by X-ray diffraction, when using an analytical approach where the dust on the air sample filter is directly analysed by the instrument. This part of ISO 16258 includes information on the instrumental parameters, sensitivity of different sampling apparatus, uses of different filters and correction for absorption effects. In this part of ISO 16258, the expression RCS includes the most common polymorphs quartz and cristobalite. The less common polymorphs of crystalline silica, such as tridymite, are not included within the scope of this part of ISO 16258 because a standard reference material is not available. Under certain circumstances (i.e. low filter dust loads, low silica content), the analytical approach described in this method may not fulfil the expanded uncertainty requirements of EN 482.[5] Guidance for calculation of uncertainty for measurements of RCS is given in ISO 24095.