ISO 16311-3-2024 PDF

ISO 16311-3-2024 PDF

Maintenance and repair of concrete structures-Part 3: Design of repairs

$96.50 $193.00 -50%
Product Code: ISO 16311-3
Stock In Stock
Edition: 2.
Published: 03/2024
Number of Pages: 28
File Size: 1 file, 1 Byte

Available Options

Product Description

Maintenance and repair of concrete structures — Part 3: Design of repairs

Introduction: The repair of defects and deterioration in concrete structures requires complex design work. This document defines the design principles, strategies, remedies and methods for the repair of concrete structures that have suffered or can suffer damage or deterioration. It gives guidance on the choice of repair design principles, strategies, remedies, methods and selection of products and systems which are appropriate for the intended use. This document identifies key stages in the repair process: — the need for assessment of the condition of the structure; — the need for identification of the causes of deterioration; — evaluating the options for repair and decision-making; — the selection of the appropriate remedies for repair; — the selection of methods; — the definition of properties of products and systems; — the specification of maintenance requirements following repair. This document does not deal with matters related to structural design and the verification of structural performance in both deteriorated and repaired condition. The information related to the deteriorated condition is presented in ISO 16311-2. This document contains Annex A which provides guidance and background information. © ISO 2024 – All rights reserved

Scope: This document defines basic considerations and decision-making for the specification of repair remedies, and management strategies for reinforced and unreinforced concrete structures. This document covers only atmospherically exposed structures, and buried or submerged structures, if they can be accessed. This document specifies repair design principles, and strategies for defects and on-going deterioration including, but not limited to: a) mechanical actions, e.g. impact, overloading, movement caused by settlement, blast, vibration and seismic actions; b) chemical and biological actions from environments, e.g. sulfate attack, alkali-aggregate reaction; c) physical actions, e.g. freeze–thaw, thermal cracking, moisture movement, salt crystallization, fire, and erosion; d) reinforcement corrosion; e) original construction defects that remained unaddressed from the time of construction. The execution of maintenance and repairs is covered in ISO 16311-4.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 16311-3-2024 PDF

ISO 16311-3-2024 PDF

$96.50 $193.00