Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment - Part 1: Criteria
Introduction: Providing the desired degree of life safety for an occupancy increasingly involves an explicit fire hazard or risk assessment. This assessment includes such components as the following: — information on the room/building properties; — the nature of the occupancy; — the nature of the occupants; — the types of potential fires; — the outcomes to be avoided, etc. This type of determination also requires information on the potential for harm due to the effluent produced in the fire. Because of the prohibitive cost of real-scale product testing under the wide range of fire conditions, most estimates of the potential harm from the fire effluent depend on data generated from a physical fire model, a reduced-scale test apparatus and procedure for its use. The role of a physical fire model for generating accurate toxic effluent composition is to recreate the essential features of the complex thermal and reactive chemical environment in full-scale fires. These environments vary with the physical characteristics of the fire scenario and with time during the course of the fire, and close representation of some phenomena occurring in full-scale fires can be difficult or even not possible on a small-scale. The accuracy of the physical fire model, then, depends on two features: a) degree to which the combustion conditions in the bench-scale apparatus mirror those in the fire stage being replicated; b) degree to which the yields of the important combustion products obtained from burning of th
Scope: This document provides technical criteria and guidance for evaluating physical fire models (i.e. laboratory combustion devices and operating protocols) used in effluent toxicity studies for obtaining data on the effluent from products and materials under fire conditions relevant to life safety.[9] Relevant analytical methods, calculation methods, bioassay procedures and prediction of the toxic effects of fire effluents can be referenced in ISO 19701, ISO 19702, ISO 19703, ISO 19706 and ISO 13344. Comparisons are detailed in ISO 29903. Prediction of the toxic effects of fire effluents can be referenced in ISO 13571 and ISO/TR 13571-2.