Protection des yeux et du visage à usage professionnel — Partie 1: Exigences générales
Introduction: The family of documents comprised of the ISO 16321 series, the ISO 18526 series and the ISO 18527 series was developed in response to the worldwide stakeholders' demand for minimum requirements and test methods for eye and face protectors traded internationally. ISO 4007 gives the terms and definitions for all the various product types. The test methods are given in the ISO 18526 series, while the requirements for occupational eye and face protectors are given in the ISO 16321 series. Eye protectors for specific sports are mostly dealt with by the ISO 18527 series. A guidance document, ISO 19734, for the selection, use and maintenance of eye and face protectors is under preparation. vi © ISO 2021 – All rights reserved
Scope: This document specifies general requirements for eye and face protectors. These protectors are intended to provide protection for the eyes and faces of persons against one or more common occupational hazards such as impacts from flying particles and fragments, optical radiation, dusts, splashing liquids, molten metals, heat, flame, hot solids, harmful gases, vapours and aerosols. Additional requirements for eye and face protectors used during welding and related techniques and for mesh protectors are given in ISO 16321-2 and ISO 16321-3, respectively. This document applies to: — all plano as well as corrective and prescription lensed protectors and components; — those eye and face protectors used for occupational-type tasks that are performed similarly to an occupation, e.g. "do-it-yourself"; — those eye and face protectors used in educational establishments. This document does not apply to: — protectors specifically intended for protection against only solar radiation and used in non- occupational environments for which the ISO 12312 series applies; — protectors for medically prescribed applications (not occupational), e.g. eye protection for severe dry eye, tints prescribed for medical conditions; — patient eye protectors during diagnosis or treatment (e.g. ISO/TR 22463); — protectors for use during medical or e.g. aesthetic applications, e.g. intense light sources (ILS) for which the ISO 12609 series applies; — protectors specifically intended for sports for which the ISO 18527 series applies; — laser protectors; — face protectors intended for live-working to protect against short-circuit electric arcs for which IEC 62819 applies; — protectors intended to protect against ionizing radiation, e.g. X-rays, for which IEC 61331-3 applies.