ISO 16332-2018 PDF

ISO 16332-2018 PDF

Diesel engines - Fuel filters - Method for evaluating fuel/water separation efficiency

$129.00 $258.00 -50%
Product Code: ISO 16332
Stock In Stock
Edition: 1ST
Published: 04/2018
Number of Pages: 52
File Size: 1 file, 1 Byte

Available Options

Product Description

Diesel engines - Fuel filters - Method for evaluating fuel/water separation efficiency

Introduction: Modern fuel injection systems, installed in passenger cars, as well as in heavy duty or off-road applications, require high and stable separation efficiencies for all insoluble contaminants in the fuel to ensure a prolonged life. Beside solid contamination, undissolved water, in finely or coarsely emulsified form, can also reduce the lifetime of injection systems. Suitable fuel/water separators, having a high level water separation efficiency, are an absolute necessity for system longevity. Factors found to affect the separation efficiency of undissolved water in the field are mainly due to the fuel quality, which can differ widely in different regions of the world and which can also differ when biogenic components are added to the fuel. Additionally the separation efficiency is strongly influenced by fuel composition. Separation efficiency tests can be applied mainly for two purposes: — To evaluate the field performance of a fuel/water separator To evaluate the performance of a fuel/water separator close to field conditions, the usage of commercially, untreated fuel as test fluid is necessary. — To compare fuel/water separators under repeatable test conditions For a fuel/water separator comparison in the laboratory, fuel conditioning is necessary to achieve constant and repeatable test conditions. Water separation efficiency results obtained with treated fuel can be significantly different from those with commercially available, untreated fuel. Tests performed with new fuel/

Scope: This document specifies a fuel/water separator comparison test under defined and simplified laboratory conditions. This test is intended for pressure side fuel/water separators as well as for suction side fuel/water separators. Pressure side fuel/water separators are tested with fine droplets and suction side filters are tested with coarse droplets using the same test rig layout. The rated flow (in litres per hour) is intended for the range between 50 l/h and 1 500 l/h. By agreement between customer and fuel/water separator manufacturer, and with some modifications, the procedures can be used for fuel/water separators with higher or lower flow rates.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 16332-2018 PDF

ISO 16332-2018 PDF

$129.00 $258.00