ISO 16345-2014 PDF

ISO 16345-2014 PDF

Water-cooling towers - Testing and rating of thermal performance

$48.00 $96.00 -50%
Product Code: ISO 16345
Stock In Stock
Edition: 1ST
Published: 06/01/2014
Number of Pages: 158
File Size: 1 file, 4 Bytes

Available Options

Product Description

Water-cooling towers - Testing and rating of thermal performance

Scope: This International Standard covers the measurement of the thermal performance and pumping head of open- and closed-circuit, mechanical draft, wet and wet/dry cooling towers and natural draft and fan-assisted natural draft, wet and wet/dry cooling towers. The standard rating boundaries for series mechanical draft, open- and closed-circuit cooling towers are specified. This International Standard does not apply to the testing and rating of closed-circuit towers where the process fluid undergoes a change in phase as it passes through the heat exchanger or where the thermophysical properties of the process fluid are not available. 2 Terms and definitions For the purposes of this document, the following terms and definitions apply. The symbols used to identify the terms contained in this International Standard are listed and defined in Clause 3. 2.1 airflow rate total amount of dry air and associated vapour water moving through the cooling tower 2.2 ambient air conditions atmosphere adjacent to, but not affected by, the cooling tower 2.3 approach difference between cold (re-cooled) water temperature and the inlet-air wet-bulb temperature 2.4 approach deviation deviation between the guaranteed and adjusted test approach 2.5 atmospheric gradient (lapse rate) average rate of change of dry-bulb temperature with change in altitude from cold water basin curb, or sill, level to around twice the height of the cooling tower Note 1 to entry: The convention for use with this International Standard will be to use a negative value for decrease in temperature as height increases. 2.6 average wind direction predominant direction of the wind over the duration of the test period 2.7 average wind speed arithmetical average of wind speed measurements taken over the duration of the test period 2.8 barometric pressure atmospheric pressure taken over the duration of each test period INTERNATIONAL STANDARD ISO 16345:2014(E) © ISO 2014 – All rights reserved

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 16345-2014 PDF

ISO 16345-2014 PDF

$48.00 $96.00