ISO 16454-2024 PDF

ISO 16454-2024 PDF

Space systems-Structural design-Stress analysis requirements

$71.50 $143.00 -50%
Product Code: ISO 16454
Stock In Stock
Edition: 2.
Published: 03/2024
Number of Pages: 22
File Size: 1 file, 1 Byte

Available Options

Product Description

Space systems — Structural design — Stress analysis requirements

Introduction: From the beginning of the space age, structural integrity verification has been one of the main fields of activity of experts in the domain of mechanics. Mission failure and potential danger to human life, expensive ground constructions and other public and private properties are the most probable consequences of a space structural integrity failure. Static strength is one of the most important critical conditions for structural integrity analysis. It is usually the main criterion for space structure weight evaluation. If the space structure is too heavy, the mission can be extremely expensive or impossible to achieve. If the space structure is under-designed, it can result in mission failure, structural failure, leading to high risk associated with safety of life, and loss of expensive hardware and other properties. It is therefore necessary to specify unique requirements for static strength analysis in order to provide cost-effective design and light-weight, reliable and low-risk structures for space application. © ISO 2024 – All rights reserved

Scope: This document provides requirements for the determination of maximum stress and corresponding margin of safety under loading and defines criteria for static strength failure modes, such as rupture, collapse and detrimental yielding. This document does not cover critical-conditions-induced fatigue, creep and crack growths. Notwithstanding these limitations in scope, the results of stress calculations based on the requirements of this document are applicable to other critical condition analysis. This document is applicable to the determination of the stress/strain distribution and margins of safety in launch vehicles and spacecraft load-bearing elements design. Liquid propellant engine structures, solid propellant engine nozzles and the solid propellant itself are not covered, but liquid propellant tanks, pressure vessels and solid propellant cases are within the scope of this document. In accordance with the requirements of this document, the models, methods and procedures for stress calculation can also be applicable to the displacements and deformation calculation, as well as the calculation of loads, applied to substructures and structural elements under consideration. When this document is applied, it is assumed that temperature distribution has been determined and is used as input data.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 16454-2024 PDF

ISO 16454-2024 PDF

$71.50 $143.00