Plastics — Marine biodegradation testing — Preparation of optimized intertidal seawater and sediment
Introduction: The assessment of the degree of biodegradation of plastics in marine habitats is one effective measure to understand and evaluate the impact of reuse, recycling and environmental pollution of plastics. The biodegradation of plastics is the process, in which plastics are decomposed by heterotrophic microorganisms, such as bacteria and fungi, through enzymatic hydrolysis and subsequent metabolization. Marine biodegradation proceeds mainly in microbial consortia that form at the interface between seawater and plastics. This is because marine microorganisms live aerobically within biofilms at the interface between the liquid phase of seawater and solid phases such as gravel and shells. The diversity of microbial consortia in the marine environment is high, depending on their natural environmental conditions. The species and number of microorganisms vary depending on the climate, ocean currents, tides, and topography. Considering the diverse habitats of these microorganisms, three types of biodegradation assessment methods have been developed: — one-phase systems consisting of seawater or sediment and — two-phase systems consisting of seawater and seafloor sediments. However, due to the diversity of microorganisms even a biodegradable material such as cellulose, which is used as a reference material, gave biodegradation results that ranged from 0 to 100 percent in ring tests of these test methods. From the perspective of biodegradable plastic specification, it is thus necessary to
Scope: This document specifies procedures for preparing seawater and sediments used in test methods to assess the biodegradation of plastic materials in the marine environment. The screened sediment and sediment- rinsed seawater are prepared to sustain aerobic testing at laboratory scale. The described method is designed to separate sediment-rinsed seawater and sand-gravel sediments from intertidal sediments by wet filtration and seawater flotation. This document does not include steps to enhance the biodegradation of plastic materials by concentrating the natural seawater, adding nutrients to the seawater, and pre-culturing the inoculum. The methods described in this document are intended to be used in addition to issued ISO standard test methods for evaluating the biodegradation and disintegration of plastic materials. The applicable evaluation test methods are ISO 18830, ISO 19679, ISO 22404, ISO 23977-1, ISO 23977-2 and ISO 23832. NOTE The conditions described in this document do not always correspond to the optimum conditions for maximum biodegradation. This is a method of preparing test sediments from coastal seafloor sediments, not a method of preparing sediments from deep-sea seafloors.