Surveillance of the activity concentrations of airborne radioactive substances in the workplace of nuclear facilities
Introduction: Sampling of airborne radionuclides and monitoring of activity concentration in workplaces are critically important for maintaining worker safety at facilities where dispersible radioactive substances are used. Specifically, air sampling and monitoring are critical for evaluation of containment integrity, evaluation of effectiveness of contamination control programs and work practices, providing measurements for qualitative dose assessment, providing a general assessment of the level of the airborne hazard in a room, and for providing workers an immediate warning when the activity concentration exceeds safe levels. This document sets forth guidelines and performance criteria for sampling airborne radioactive substances and monitoring activity concentration in the workplace of nuclear facilities. Emphasis is on health protection for workers in indoor environments. This document provides best practices and performance-based criteria for the use of sampling devices and systems, including delayed radioactivity measurement samplers and continuous air monitors. Specifically, this document covers air sampling program objectives, design of sampling and monitoring programs to meet program objectives, methods for air sampling and monitoring in the workplace, and quality assurance to ensure system performance toward protecting workers against unnecessary inhalation exposures. Taken together, these activities constitute the sampling or surveillance program. The primary purpose of the surv
Scope: This document provides guidelines and performance criteria for sampling airborne radioactive substances in the workplace. Emphasis is on health protection of workers in the indoor environment. This document provides best practices and performance-based criteria for the use of air sampling devices and systems, including retrospective samplers and continuous air monitors. Specifically, this document covers air sampling program objectives, design of air sampling and monitoring programs to meet program objectives, methods for air sampling and monitoring in the workplace, and quality assurance to ensure system performance toward protecting workers against unnecessary inhalation exposures. The primary purpose of the surveillance of airborne activity concentrations in the workplace is to evaluate and mitigate inhalation hazards to workers in facilities where these can become airborne. A comprehensive surveillance program can be used to — determine the effectiveness of administrative and engineering controls for confinement, — measure activity concentrations of radioactive substances, — alert workers to high activity concentrations in the air, — aid in estimating worker intakes when bioassay methods are unavailable, — determine signage or posting requirements for radiation protection, and — determine appropriate protective equipment and measures. Air sampling techniques consist of two general approaches. The first approach is retrospective sampling, in which the air is sampled, the collection medium is removed and taken to a radiation detector system and analysed for radioactive substance, and the concentration results made available at a later time. In this context, the measured air concentrations are evaluated retrospectively. The second approach is continuous real-time air monitoring so that workers can be warned that a significant release of airborne radioactivity may have just occurred. In implementing an effective air sampling program, it is important to achieve a balance between the two general approaches. The specific balance depends on hazard level of the work and the characteristics of each facility. A special component of the second approach which can apply,