ISO 16659-1-2022 PDF

ISO 16659-1-2022 PDF

Ventilation systems for nuclear facilities-In-situ efficiency test methods for iodine traps with solid sorbent-Part 1: General requirements

$96.50 $193.00 -50%
Product Code: ISO 16659-1
Stock In Stock
Edition: 1.
Published: 12/2022
Number of Pages: 28
File Size: 1 file, 2 Bytes

Available Options

Product Description

Ventilation systems for nuclear facilities — In-situ efficiency test methods for iodine traps with solid sorbent — Part 1: General requirements

Introduction: In nuclear facilities, iodine traps are usually used on ventilation systems to limit radioactive iodine effluent releases into the environment, to reduce iodine concentration in the air of facilities by recycling or to prevent radioactive iodine from entering into protected areas (such as control room for example). Some examples of the iodine trapping systems are shown in Annex B. The knowledge or the warranty of the capacity of these devices to trap iodine could be necessary, particularly when they are valued in the safety demonstration. The IAEA recommends in the Safety Guide SSG-53[21] to test periodically the efficiency of confinement systems used to limit gaseous radioactive effluents releases into the environment. This recommendation is transcribed in some national rules by requirements about testing the efficiency of filtration or scrubbing devices of facilities’ ventilation systems but, no international standard exists for the methods to be used for testing them in situ. ISO 17873 and ISO 26802 recommend periodic testing after their installation as well. Some design recommendations may also be found in national standards (e.g. ASTM standard[8]). This document is the general part of a set of standards on the different current methods of tests. It describes common provisions to use to test in situ the iodine trap scrubbing efficiency of ventilation systems of nuclear facilities. These provisions deal with the methods used according to the expected role of this iodine tr

Scope: The scope of ISO 16659 series is to provide different test methods aiming at assessing the efficiency of radioactive iodine traps in ventilation systems of nuclear facilities. The ISO 16659 series deals with iodine traps containing a solid sorbent — mainly activated and impregnated charcoal, the most common solid iodine sorbents used in the ventilation systems of nuclear facilities — as well as other sorbents for special conditions (e.g. high temperature zeolites). The scope of this document is to provide general and common requirements for the different test methods for industrial nuclear facilities. The different methods will be described in other specific parts of ISO 16659 series. Nuclear medicine applications are excluded from the scope of ISO 16659 series. In principle, ISO 16659 series is used mainly for filtering radioactive iodine, but other radioactive gases can also be trapped together with iodine. In such a case, some specificity may have to be adapted for these other radioactive gases in specific parts of ISO 16659 series. This document describes the main general requirements in order to check in situ the efficiency of the iodine traps, according to test conditions that are proposed to be as reproducible as possible.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 16659-1-2022 PDF

ISO 16659-1-2022 PDF

$96.50 $193.00