Petroleum and related products — Determination of anti-aging for phosphate ester turbine control fluids
Introduction: Anti-aging performance of phosphate ester hydraulic fluid is essential for the safe, stable and economical operation of turbine speed control systems. This document establishes a standardized method to evaluate anti-aging performance of phosphate ester hydraulic fluid, aiming to mitigate global hazards resulting from improper usage of the fluid. The test method described in this document involves an aging process, in which a sample, water, oxygen and copper catalyst are put into a closed stainless-steel vessel, injecting oxygen at a certain pressure and then aged at a constant temperature for some time. Compared to EN 14832 and EN 14833, which evaluate oxidation and hydrolytic stability with an open testing system, this method uses a closed pressurized vessel for aging and has a shorter duration. The anti-aging performance of the sample is expressed by the increase of acid number over the ageing process. The acid number is determined with one of the test methods specified in ISO 6618 or ISO 6619. Acid numbers determined according to ISO 6619 cannot be directly comparable to results from ISO 6618. Therefore, it is only possible to compare results obtained using the same method. © ISO 2025 – All rights reserved
Scope: This document specifies an aging method for phosphate ester turbine control fluids. These products fall into category HFDR as specified in ISO 6743-4 and into categories TSD, TGD and TCD as specified in ISO 6743-5. The amount of acid developed during the test is used to assess the level of anti-aging performance. This document is applicable to the anti-aging performance determination for phosphate ester turbine control fluids that are both new and in-service.