Space systems - Disposal of orbital launch stages
Introduction: A launch vehicle stage plays a critical role in moving a spacecraft toward or into its final mission orbit. Once the spacecraft has been delivered to the desired orbit, the stage can be separated from the spacecraft. If the stage itself is in orbit and is deactivated at this point, it becomes another object added to the growing population space debris – an uncontrolled object that may threaten operating satellites for the remainder of the stage’s orbit lifetime. And a launch vehicle stage may also be a source for large numbers of smaller threatening objects if residual propellants, pressure vessels or other sources of stored energy explode or if it is involved in a collision with another object. This International Standard in one of several standards focused on minimizing the growth of space debris, and removing orbital launch stages from orbit or moving them to non-threatening orbits at the end of their missions is an important component of this strategy. This International Standard provides guidance on how a spacecraft owner and a launch service provider can work together to develop spacecraft deployment options leading to removal of an orbital launch stage either by re-entering the stage into the atmosphere in a short time or by leaving the stage in or moving the stage to an orbit that does not intersect regions of heavy use by satellite missions for a very long time. This International Standard also calls for eliminating all sources of stored energy remaining in the stage
Scope: This International Standard focuses on disposal of launch vehicle stages used during launch of spacecraft to be operated in space where the orbital launch stages are left in orbit after the spacecraft are released. End-of-mission disposal of launch vehicle orbital stages broadly means removing the stages from the protected regions of space (see ISO 24113) so as not to collide or otherwise interfere with the other users of those protected regions in the future. ISO 24113 also requires that “During the disposal phase, a spacecraft or launch vehicle orbital stage shall permanently deplete or make safe all remaining on- board sources of stored energy in a controlled sequence.” These “passivation” actions are typically either accomplished in the course of disposal, or immediately follow the disposal operations. In this document, the term “disposal actions” refers to both disposal manoeuvres and to passivation actions (note: passivation actions are not required after the final manoeuvre leading to a controlled re-entry). ISO 24113 provides six options for spacecraft or orbital launch stage disposal. This International Standard specifies techniques for planning and executing disposal of orbital launch stages that are consistent with ISO 24113 requirements, reflect current internationally accepted guidelines, and consider current operational procedures and best practices.