ISO 16702-2026 PDF

ISO 16702-2026 PDF

Workplace air-Determination of total organic isocyanate groups in air using 1-(2-methoxyphenyl) piperazine and liquid chromatography

$113.50 $227.00 -50%
Product Code: ISO 16702 (2026)
Stock In Stock
Edition: 3.
Published: 07/2026
Number of Pages: 40
File Size: 1 file, 2.3 MB

Available Options

Product Description

Workplace air — Determination of total organic isocyanate groups in air using 1-(2-methoxyphenyl) piperazine and liquid chromatography

Introduction: Isocyanates are organic compounds containing the isocyanate functional group (-NCO) and are widely used in industrial applications such as the manufacture of polyurethanes, paints, coatings, foams, plastics and adhesives. They are highly reactive substances and are well-established respiratory sensitisers, representing a major cause of chemically induced occupational asthma. Occupational exposure can occur primarily by inhalation and, potentially, by skin contact. Occupational exposure limits for isocyanates have been established in several countries and are generally expressed in terms of total isocyanate, defined as the sum of monomeric and polymeric isocyanates, including oligomeric and prepolymeric forms. These limits are specified as long-term (8 h time-weighted average) and short-term (15 min) exposure limits and require analytical methods capable of determining total isocyanate groups in workplace air. The sampling and analysis of airborne isocyanates present particular challenges due to the diversity of chemical structures, molecular masses and physical forms encountered in workplace atmospheres. Isocyanates can be present as vapours, aerosols or liquids and often occur as mixtures of monomers, oligomers and polymers. Other airborne substances, such as water vapour, dust, amines and alcohols, can also be present and can interfere with analytical determination. In addition, reference standards for many polymeric isocyanates are currently not available, despite their co

Scope: This document specifies a test method for the sampling and analysis of airborne organic isocyanate (NCO) compounds in workplace air. The method covers organic compounds containing free isocyanate functional groups, including monomeric, oligomeric, prepolymeric and polymeric isocyanates, and addresses the measurement of total isocyanate groups in air samples collected for the assessment of occupational exposure. The method is suitable for personal air sampling in the breathing zone for the determination of time-weighted average concentrations over sampling periods ranging from approximately 10 min to 8 h, although it can be applied to shorter sampling periods with high isocyanate air levels. It can also be used for background or fixed-location air sampling; however, due to aerodynamic effects, samplers designed for personal sampling do not necessarily exhibit the same collection characteristics when used for other purposes. It covers the measurement of airborne organic isocyanates over a concentration range of approximately 0,1 µg/m3 to 140 µg/m3 for a nominal air sample volume of 15 l; under the conditions specified in this document, typical qualitative and quantitative detection limits correspond to approximately 0,07 µg/m3 and 0,3 µg/m3, respectively, for a 15 l air sample. This document does not apply to the simultaneous determination of isocyanates and amines, nor to modified methods employing alternative sampling devices or detection techniques not described in this document.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 16702-2026 PDF

ISO 16702-2026 PDF

$113.50 $227.00