Ingénierie de la sécurité incendie - Sélection de scénarios d’incendie et de feux de dimensionnement - Partie 1: Sélection de scénarios d’incendie de dimensionnement
Introduction: Selection of the fire scenarios requiring analysis is critical in fire-safety engineering. The number of possible fire scenarios in any built environment (a building or other structure) can be very large and it is not always possible to quantify them all. In order for these fire scenarios to be made amenable to analysis, they are reduced from this large set of possibilities to a small set of design fire scenarios. The characterization of a fire scenario comprises a description of fire initiation, the growth phase, the fully- developed phase, decay and extinction, together with the likely smoke and fire spread routes. This includes a description of the interaction with the proposed fire protection features for the built environment. The possible consequences of each fire scenario should be considered. This document introduces a methodology for the selection of design fire scenarios that is tailored to the fire-safety design objectives. Several fire-safety objectives can be addressed, including safety of life (for occupants and rescue personnel), conservation of property, protection of the environment and preservation of heritage. A different set of design fire scenarios can be required to assess the adequacy of a proposed design for each objective. Following selection of the design fire scenarios, a description of the assumed characteristics of the fire on which the scenario quantification is based is needed. These assumed fire characteristics are referred to as “the design fi
Scope: This document describes a methodology for the selection of design fire scenarios for use in fire-safety engineering analyses of any built environment, including — buildings, — structures, and — transportation systems. This document specifies procedures for selecting a manageable number of design fire scenarios using a qualitative or semi-quantitative approach. NOTE See ISO 16732-1 for a full quantitative approach using risk assessment.